MobileRead Forums - View Single Post - PRS-T1 Is there hope?

uboot · 08-21-2013, 03:17 PM

This won't work with your PRS-T1.

There is a special rescue image that can be put on SD card and booted from. It will give you a linux root shell over USB serial connection as well as access to internal flash memory via USB gadget driver.

Download rupor-rescue.7z from here: http://translate.google.com/translat...hp%3Ft%3D23354

Unzip into root folder of fat formated sd card and boot up the reader while keeping home+menu pressed until progress bar becomes 100%.

Now, you can connect to computer via USB and start messing around

I would try a manual factory reset first: https://wiki.mobileread.com/wiki/PRST...#Factory_Reset

08-21-2013, 03:17 PM	#3
uboot Evangelist Posts: 425 Karma: 75216 Join Date: Nov 2011 Location: old europe Device: Kobo Mini, Tolino Epos 2	This won't work with your PRS-T1. There is a special rescue image that can be put on SD card and booted from. It will give you a linux root shell over USB serial connection as well as access to internal flash memory via USB gadget driver. Download rupor-rescue.7z from here: http://translate.google.com/translat...hp%3Ft%3D23354 Unzip into root folder of fat formated sd card and boot up the reader while keeping home+menu pressed until progress bar becomes 100%. Now, you can connect to computer via USB and start messing around I would try a manual factory reset first: https://wiki.mobileread.com/wiki/PRST...#Factory_Reset