I have a Kindle 3 3G/Wifi I've been trying to debrick with K3Flasher. When I try to use the K3Flasher reset option I get:
Code:
$ sudo ./k3flasher mx35to2_mmc.bin reset
I: found suitable device
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
I: above error can be ignored, it's due to the device being in ROM kernel mode
E: kindle reported a memset error: 0x56787856
E: error when initializing SoC registers
E: aborting. It is suggested you power-cycle the device.
if I try to use the K3Flasher info option I get:
Code:
$ sudo ./k3flasher mx35to2_mmc.bin info
I: found suitable device
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
I: above error can be ignored, it's due to the device being in ROM kernel mode
I: RAM kernel should be running now. Trying to re-open device: .
I: got it.
I: read info
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
E: aborting. It is suggested you power-cycle the device.
I have two batteries that I charged outside of the Kindle (using an external power supply) and both are showing >4.2V so a dead/weak battery should not be the issue.
Any advice on next steps I should take? Feel free to reply with any questions.