Quote:
Originally Posted by meeera
Charge fully (poss with a different USB cable), power off (regardless of what you see on the screen), then hold the light switch while paperclipping? Then repeat, in case your power off was actually a power on.
|
Hi meeera;
Tried a brand new cable. With this, as with the previous cable, it appears that Windows doesn't recognize the connection, as it does with a functioning device. I left it connected for 8-10 hours in any event.
There's absolutely no change in the "Restarting" screen at any time. The only response I get from the device is on the LED, when doing a paperclip reset:
The LED glows green for about 1/2 second, then goes blue, then flashes blue 7 times. Then, as they say, "That's all she wrote."
Methinks it's toast.