Quote:
Originally Posted by davidfor
I don't see it as bad as that. The main issue I have is slipping as I push the card in and it comes out or seems to registers twice. I see the not FAT32 message a lot but it does ad the books. I suspect this is caused by the bad inserting.
|
Well, this might happen. But in my case, I used to never exit the SD-card, and over many months, it worked without any issues. I have only been forced to pull it off and insert it again when I noticed that at the booting under 2.6.1 there were shown no books of the SD-card, neither on the home screen, nor in the bibliotheque. But, even handling it as carefully as possible, things became really hard. And even having achieved that the reader finally took notice of the SD-card, at last, when I run the reader down and start it again, the SD-card is lost again, even not having removed it before. It's just like the slot (or the contacts of the SD-card) would be damaged. But this can scarcely be, as the card has always been safely in the reader. And it works properly under calibre.
In each case, this cannot be the future state of my reader.