Thread: iLiad Shell access again
View Single Post
Old 06-05-2013, 04:54 AM   #3
yokos
Pac-Man caught my iLiad.
yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.yokos can teach chickens to fly.
 
yokos's Avatar
 
Posts: 807
Karma: 3595
Join Date: Apr 2006
Location: Germany; next to Baltic Sea
Device: Boox Max Lumi, iRex iLiad (RIP)
Could you please check, whether you can reflash your iLiad. Wiki says, you need firmware 2.11 and Developer Package (If it is really needed there must be more than entry in registry.xml).
https://wiki.mobileread.com/wiki/How_...ash_your_iLiad
Quote:
Originally Posted by wiki/How_to_reflash_your_iLiad
You want to be sure that you are able to reflash before you break anything. Here's what you need to do.

Make sure your iLiad is powered off, with nothing on the screen.
Hold the connect button in the upper right hand corner of your iLiad.
While holding the button, press the power switch on the bottom.
Count to Five while continuing to hold the button.
Release the connect button.


You should see the boot image appear. After a second or two, the whole screen will flash white, and it will start to boot normally. Congratulations! Your iLiad is able to be reflashed.
yokos is offline   Reply With Quote