[jbbebg]

I did some sketches regarding to the cradle station. Sorry, the sketched were made by handwork in Iliad and they should be used more for the explanation of the cradle construction.
Generally cradle is made by just 6 different peaces of the FR4 material (base material for the Printed Circuit Boards).
Some position should be adjusted before fixed by soldering directly with mounted Iliad.
The essential cradle to Iliad adjusting part are attached again in more accurate photo.
The both eject button on the Iliad plug should be finally blocked with some material; I did it by electrical wire to disable the fastened the connector (blue on photo).
The units are in mm and I do not guarantee for them, yours may be a little different. You should take your own risk for assembling the cradle.