View Single Post
Old 05-20-2013, 06:37 PM   #5
ClareK
Connoisseur
ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.ClareK can program the VCR without an owner's manual.
 
Posts: 76
Karma: 175816
Join Date: Apr 2012
Device: Laser
Is your ereader backlit, and, if so, does the screen light up when the reader is plugged into the computer?

My Chinese ereader had a similar problem, although this was after I had had it for some time. The battery had gone completely flat, and although I left it plugged into the USB port all day, it still wouldn't turn on. Fortunately I have a wall charger, so I tried plugging it into that. While it is attached to the wall charger it is still possible to use the reader and to change settings, so I was able to adjust the light setting from "always on" to 30 seconds - after that, the light went off, and the ereader charged perfectly.

Since then I have been careful never to let the battery go flat, and I always try to remember to change the light setting before I charge the reader.
ClareK is offline   Reply With Quote