Quote:
Originally Posted by chaley
I am using calibre 0.9.30 and am having no problems connecting my Nexus 7 as a wireless device. It takes less than 7 seconds to connect and sync metadata for 108 books. The fixed release 0.9.29 and release 0.9.30 work for many other people that have contacted us. Because of this, I strongly suspect that your problem is caused by something else.
You haven't given us enough information to try to work out what the problem is. Some questions ... - What version of CC (calibre companion) are you running?
- What version number does calibre display in the lower left corner of the screen?
- Has it ever worked, or is this a new install?
- What connection problem does calibre 64 have? Does it display a message?
- Does syncing with calibre 32 ever finish?
It would be very helpful if you posted a debug log for a connection that "takes forever". See the CC FAQ answer https://www.mobileread.com/forums/sho...37#post2396437 for instructions to get a debug log. |
1. Version of CC is 2.8.1 on Samsung Galaxy S III
2. If I'm writing that it was 0.9.30 [64-bit], it is 0.9.30 [64-bit]...
3. Computer is about two years old, so is a calibre install (I'm using it for few years). I started using 64-bit version since 0.9.27.
4. 64 bit Calibre did display "Error communicating with the device" message...
5. Today 64 bit version did connect with companion, after 32-bit version performed lengthy (5-10 minutes) connection session... Since calibre does work, I can't post debug log.
Nevertheless, problem did exist, so there...
Edited: tonight it returned again, see copy of error message:
Traceback (most recent call last):
File "site-packages\calibre\gui2\device.py", line 85, in run
File "site-packages\calibre\gui2\device.py", line 470, in _books
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 49, in _synchronizer
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 1021, in books
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 580, in _call_client
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 613, in _receive_from_client
TimeoutError: There was a timeout while communicating with the device in function: Device did not respond in reasonable time
Debug log:
1 Get device information started
SMART_DEV ( 37.05: 0.000) get_device_information
SMART_DEV ( 37.13: 0.001) _call_client GET_DEVICE_INFORMATION wfr True
SMART_DEV ( 38.75: 1.540) _call_client SET_CALIBRE_DEVICE_INFO wfr True
SMART_DEV ( 39.04: 0.234) card_prefix
SMART_DEV ( 39.10: 0.001) free_space
SMART_DEV ( 39.14: 0.001) _call_client FREE_SPACE wfr True
DeviceJob: 1 Get device information done, calling callback
DeviceJob: 1 Get device information callback returned
SMART_DEV ( 39.44: 0.257) set_progress_reporter
Job: 2 Get list of books on device started
Job: 1 Get device information finished
No details available.
SMART_DEV ( 39.48: 0.000) books None
SMART_DEV ( 39.52: 0.001) _call_client GET_BOOK_COUNT wfr True
SMART_DEV ( 99.57: 60.002) _receive_from_client timeout communicating with device
SMART_DEV ( 99.61: 0.001) _call_client other exception
Traceback (most recent call last):
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 580, in _call_client
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 613, in _receive_from_client
TimeoutError: There was a timeout while communicating with the device in function: Device did not respond in reasonable time
DeviceJob: 2 Get list of books on device done, calling callback
There was a timeout while communicating with the device in function: Device did not respond in reasonable time
Traceback (most recent call last):
File "site-packages\calibre\gui2\device.py", line 85, in run
File "site-packages\calibre\gui2\device.py", line 470, in _books
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 49, in _synchronizer
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 1021, in books
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 580, in _call_client
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 613, in _receive_from_client
TimeoutError: There was a timeout while communicating with the device in function: Device did not respond in reasonable time
DeviceJob: 2 Get list of books on device callback returned
SMART_DEV ( 99.66: 0.014) post_yank_cleanup
READING LIST: Device disconnected
Job: 2 Get list of books on device finished
There was a timeout while communicating with the device in function: Device did not respond in reasonable time
Traceback (most recent call last):
File "site-packages\calibre\gui2\device.py", line 85, in run
File "site-packages\calibre\gui2\device.py", line 470, in _books
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 49, in _synchronizer
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 1021, in books
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 580, in _call_client
File "site-packages\calibre\devices\smart_device_app\driver.p y", line 613, in _receive_from_client
TimeoutError: There was a timeout while communicating with the device in function: Device did not respond in reasonable time
Updating to 0.9.31 right now, will see if this helps.
Edit:
Yes it works fine
I hope I can stick to 64-bit version from now on...
P.S. BTW, 32-bit calibre when synching long time, behaved exactly as one at Doctor's device
Cheers,
Mike