Thank's for answer.
Quote:
Originally Posted by rkomar
If you go to Configuration>Maintenance>Format_SD_Card, you can get the reader to format it to what it can use. I'm not 100% sure if it creates a new partition table.
|
I can't go to Configuration.
Quote:
Originally Posted by rkomar
If not, then you should set the filesystem type to 0x0c (W95 FAT32 (LBA)).
|
This is "fdisk -l" command:
Code:
Disk /dev/sdb: 1001 MB, 1001078784 bytes
255 heads, 63 sectors/track, 121 cylinders, total 1955232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c984c
Device Boot Start End Blocks Id System
/dev/sdb1 63 1943864 971901 c W95 FAT32 (LBA)
I can go only to library in PocketBook, it shows my 0/-1MB (free/total).
Please, help