View Single Post
Old 01-06-2013, 05:28 PM   #128
Junior Member
Skynet_Italy began at the beginning.
Skynet_Italy's Avatar
Posts: 5
Karma: 10
Join Date: Dec 2012
Device: Kobo Arc
Originally Posted by Skynet_Italy View Post
During some tests with the configuration of wifi i found some of the limitations in Kobo Arc.

The Kobo Arc ( my) has a connection stable with the router only on channel 1.
The connection on channels 2 and 3 is unstable while on all the other is impossible.
This might be the reason here some unable to have a good wifi.
As proof you should set the ruter on channel 1 and not automatic.

For developers .
The Kobo receives the signal on all channels but probably only transmits on channel 1 or channel 2.
I can manually set the transmission channel or there is a hardware limitation
Sorry for the problem and result depend on the router.

Set with a band at 270mb ( is non-standard 802.11n ) transmission on channel higher than 2-3
the transmission is unstable

NetGear DGN2000.

to have greater stability and use all the channels i have to use 150Mb or the standar b and g

i hope that my error can help some.

If you set the router at a speed greater than 150Mb happens the stability, especially if you have the 802.11n standard
Skynet_Italy is offline   Reply With Quote