Quote:
Originally Posted by nathansuchy
How do i do this i imstalled the software and have lastest kindle software
|
It's in the README.
give it a read. configure the
config in /etc to be what you want.
pretty much (if you have ssh) you could just type
usbnetwork at the prompt and enter the correct mode.
Assuming you don't have that it can be triggered with the search bar with
~usbnetwork when
~debugon has been activated.
(or is it a ~ on the 3 - I forget?)
Anyways. have a read around. cheers.
You don't state your operating system so here the advice ends: However: you will need to do some faffing at the PC end to setup usb0 IP address (at a minimum) if you are not going the
key authentication route via SSH.
HTH