Quote:
Originally Posted by hawhill
Sorry, I wasn't all that helpful - except I guess charging for some time (hours! even a day!) is a good idea anyway. But that's for the battery and device recognition part of the story. Don't trust LED, it's not helpful at this early stage in device boot-up.
As qlob advised, use the 3.0.2 images. You can bother about updating when/if the device is up and running again. Always make sure rootfs and kernel are corresponding. I think uboot did stay the same, so that shouldn't matter for partition table / bootloader.
Flash the partition table / boot loader first (to offset 0x0). Then flash the kernel (to offset 0x00041000). Then flash rootfs (to offset 0x003c1000).
Good luck!
|
THANKS, very helpful indeed! So, the bootloader offset is 0x0 (not 0x00000000).
When I unzip the rootfs files for both links:
mmcblk0p1-3.0.2 (factory):
https://docs.google.com/open?id=0BwJ...jVuM0FXUzd4d00
AND
mmcblk0p1-3.0.2 (factory):
http://db.tt/iPs8FdNw
it remains archived. Will try that still though after renaming.