[rgerade]

A short intro: I've been following this thread for a couple of weeks trying to debrick a Demo K3. Got myself in trouble when trying to use ATK on Win 7 to rewrite the kernal and rootfs. When switching ATK Flash model to MMC/SD I didn't realize that it had reset the starting address back to 0x00000000 - oops! Am patiently awaiting for Hawhill to upload the boot code.

However, in my trials to get this all working I was having trouble trying to flash on one Win 7 machine but had no trouble on the other. I finally noticed when looking at the devices and printers screen I would get the SP Blank Ringo device with exclamation point and no driver loaded on the non-working computer and would get a normal looking device on the good computer. The driver that was being loaded was title MX35 using windrvr6.sys, device provider Jungo.

I ran the ATK uninstall process, plugged in my Kindle and rebooted. I then installed ATK 1.70 once again and made sure all the drivers got loaded. As soon as the MX35.inf file was loaded I heard the USB. Can now flash on both win 7 machines.

Maybe Hawhill will find time to upload the boot code he mentioned last week

Thanks