Quote:
Originally Posted by knc1
Hmm...
That should indicate that the iROM kernel was unable to load the "RAM kernel" into ram.
Perhaps because it could not start the DDR2 ram.
Try the other "RAM kernel" -
Hawhill is about 8 time zones away, probably asleep at this time, so we have to struggle along without him.
|
Hrm......
Got it to work now, but this could be a bad sign:
Code:
[root@frankenboxen k3flasher]# sudo ./k3flasher mx35to2_mmc.bin info
I: found suitable device
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
I: above error can be ignored, it's due to the device being in ROM kernel mode
I: RAM kernel should be running now. Trying to re-open device: .
I: got it.
I: read info
<long pause>
E: reading data from device: LIBUSB_ERROR_NO_DEVICE
E: aborting. It is suggested you power-cycle the device.