Quote:
Originally Posted by qlob
I'm getting an error, could just be my Kindle though...
Code:
[root@frankenboxen k3flasher]# sudo ./k3-backup.sh
This will backup your K3.
After starting this, bring your K3 into USB downloader mode.
The whole backup procedure will take about 1 hour.
W: cannot find device (is it in USB loader mode? are you root?) - waiting for it....................
I: success.
I: found suitable device
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
I: above error can be ignored, it's due to the device being in ROM kernel mode
I: RAM kernel should be running now. Trying to re-open device: .
I: got it.
I: read info
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
E: aborting. It is suggested you power-cycle the device.
|
Hmm...
That should indicate that the iROM kernel was unable to load the "RAM kernel" into ram.
Perhaps because it could not start the DDR2 ram.
Try the other "RAM kernel" -
Hawhill is about 8 time zones away, probably asleep at this time, so we have to struggle along without him.