Thread: Touch Kobo Touch Firmware 2.0
View Single Post
Old 08-10-2012, 09:23 AM   #822
Peakcrew
Avid reader of sci-fi
Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.Peakcrew can successfully navigate the Paris bus system.
 
Peakcrew's Avatar
 
Posts: 384
Karma: 36724
Join Date: Sep 2011
Location: Scotland
Device: Kobo Touch, Lenovo X61, Samsung Galaxy Note with Aldiko reader app
About to get new KT: a few questions.

I hope I'm not in the wrong thread here - please let me know if I am. I am about to get a KT (it is somewhere in the postal system at the moment) as a replacement for my broken Jetbook. I will have only a few days to get it working before I go away to my in-laws', so I need a lot of reading material . Whilst I am quite happy to play with my KT (indeed, looking forward to it), I really need it to function as a good ereader for the time I am away, because English-language books are expensive where I am going, if you can get them at all. I am hoping not to have to take my laptop with me to save a bit of weight, so I need the KT to be a stable reader for a week.

With that in mind, I have a few questions after reading this thread over the last couple of days

1. Which firmware is best for simply reading books at this point? I have a library of books already in Calibre, all epubs, most of which have been edited by me using Sigil. I would prefer to keep the books on the 8GB micro-SD card I have (which recent forum-patrolling suggests might be a problem) in case I need to do a factory backup whilst away. I have downloaded the .zips of 1.9.17 and 2.0.2 to my computer already.

2. Of course, I don't know which firmware will be on the KT when I get it, so are there are any previous ones that I should avoid? (Working on the basis that if it comes with an acceptable version, I might as well stick with that).

3. Am I right in thinking that if I connect the KT to the internet via wifi at all it will immediately upgrade to FW2.0.0 if I am using an earlier version? (If so, this would be a minor nuisance because I wanted to play with the browser, but it can wait).

4. I have got the impression that I will not be able to sideload books if I have not registered the KT. Is this correct?

5. Finally, if I did (successfully) use FW2.0.2, is the slow page-turn in sideloaded books restricted to epubs, i.e. if I convert the books I want to take into, say, .mobis, will the problem be reduced?

Sorry for so many questions as a newcomer, but the success of my visit to the other side of the family depends on this working!

Last edited by Peakcrew; 08-10-2012 at 01:36 PM. Reason: I doubled the size of my SD card!
Peakcrew is offline   Reply With Quote