Quote:
Originally Posted by Lotheric
I have an original Kobo reader (bought it online in Canada) with v1.4 (updated a few years back). I'm seeing there's a new version that allow faster page turns. I updated my Kobo software and it tells me I can upgrade to 1.8 but the updating process does not work. I follow the steps and once I'm at the point where I have to set my Kobo in firmware update mode, I do it (holding the two buttons) but then when I click continue it skips to the end in 0 seconds saying the upgrade was succesful... And I'm still on 1.4
any tips ?
EDIT: In other words, steps 5, 6 and 7 (described in this thread) are completed instantly and nothing happens (the spinning thing on the screen that keeps spinning until you plug your eReader back in never show up and the kobo stays blank). All I can do at this point is a reset and that brings it back to 1.4.... |
I get the same thing. I have an original Kobo eReader (purchased at Chapters/Indigo in Canada) with version 1.4 firmware. On my Win7 PC, I have Kobo Desktop 3.0 installed. When I connect a USB cable and sync, it asks me to install 1.8, and I start the 7-step upgrade process. I successfully get my Kobo ereader into update mode in step 4 (red light is on and the screen is blank). When the program asks me if I was able to get update mode properly, I click on Continue, and the update program immediately skips steps 5 and 6 (this is the bug!)and goes
immediately to step 7, falsely indicating success. Since step 5 and 6 are skipped, the program hasn't even got to the point where it asks me to reconnect the cable after putting Kobo into Update Mode (step 4 does not yet tell you to reconnect your cable after the red light comes on). Meanwhile my ereader is still in update mode when I reach step 7. I cannot go to previous screens for steps 5 or 6. I have no alternative at this point but to do a reset with a paperclip. When I get to the settings screen from the menu, of course the Kobo states that I still have v1.4 firmware installed.
I have also tried reconnecting my USB cable in step 4 after the Kobo is rebooted in Update Mode and the red light on (even though I haven't been asked to reconnect yet) BEFORE clicking on Continue, just to see if I can get the update program to get to steps 5 and 6. No luck - it immediately goes to step 7. I get this problem on both Kobo Desktop 3.0 for Windows, and on Kobo Desktop 3.0 for my Mac on OS X.
I suspect that the original Kobo eReader firmware V1.4 -> V1.8 update program might have worked with Kobo Desktop 2.0, but no longer works with Kobo Desktop 3.0. It would seem that something is causing it to skip the step 5 and 6 screens (where the new firmware is downloaded to the Kobo while in Update Mode and before the program tells the bootloader to restart after flashing the new firmware) and it goes straight to the step 7 success screen. The step 6 screen flashes momentarily for about 1/8th of a second.
Perhaps because most Kobo users have more recent Kobo touch or Kobo WiFi models, the testing of the original Kobo version firmware update procedure html screens with the new Kobo Desktop 3.0 may not have been done thoroughly.