MobileRead Forums - View Single Post

geekmaster · 07-22-2012, 07:01 PM

The host PC USB network interface is independent of any other network device on your host PC. It needs to have its own unique IP subnet (not used on any other network interface on the host PC). You need to manually assign the IP address to 192.168.15.201 on the USB network (RNDIS interface) on the host PC. Then you should see the kindle after NUZX. SSH to root@192.168.15.244, and use the root pw (either "mario" or "fionaXXX" computed from your serial number). There is a web page that computes the fionaXXX password (listed in the tools index wiki).

07-22-2012, 07:01 PM	#9
geekmaster Carpe diem, c'est la vie. Posts: 6,433 Karma: 10773670 Join Date: Nov 2011 Location: Multiverse 6627A Device: K1 to PW3	The host PC USB network interface is independent of any other network device on your host PC. It needs to have its own unique IP subnet (not used on any other network interface on the host PC). You need to manually assign the IP address to 192.168.15.201 on the USB network (RNDIS interface) on the host PC. Then you should see the kindle after NUZX. SSH to root@192.168.15.244, and use the root pw (either "mario" or "fionaXXX" computed from your serial number). There is a web page that computes the fionaXXX password (listed in the tools index wiki). Last edited by geekmaster; 07-22-2012 at 07:22 PM.