Hi folks:
I compiled the latest version and I see:
Code:
LilArooni ~/development/k3flasher: sudo ./k3flasher mx35to2_mmc.bin program 0x00041000 uImage
I: found suitable device
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
I: above error can be ignored, it's due to the device being in ROM kernel mode
I: RAM kernel should be running now. Trying to re-open device: .
I: got it.
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
E: aborting. It is suggested you power-cycle the device.
LilArooni ~/development/k3flasher: sudo ./k3flasher mx35to2_mmc.bin program 0x00041000 uImage
I: found suitable device
E: wrong transfer length, wanted to receive 8 bytes but received 4 bytes.
I: above error can be ignored, it's due to the device being in ROM kernel mode
I: RAM kernel should be running now. Trying to re-open device: .
I: got it.
I: flashing 0x00204600 (=2115072) bytes
LilArooni ~/development/k3flasher: ls -l
So not sure if that was "success" or not. And still not sure what I need to do to get the Kindle working. It's still happily frozen on the library screen. I'm wondering if it would just be better to give up on this and wait for the broken screen kindle and swap the internals out.