MobileRead Forums - View Single Post - So, I think I bricked my k4 good and proper

geekmaster · 06-22-2012, 10:42 AM

What is the VID/PID of that "unknown device"?

It may be in fastboot mode, which does not change the screen. If you set fastboot mode from diags, you should see the diags menu.

You should still be able to boot to other modes using MfgTool.

And you can change your bootmode idme var to main using the fastboot tool, or using diags idme command from SSH.

This is all documented elsewhere (in many posts), and indexed, and summarized in a small guide for beginners. You just need to the in the right places. Start with the master index sticky.

06-22-2012, 10:42 AM	#2
geekmaster Carpe diem, c'est la vie. Posts: 6,433 Karma: 10773670 Join Date: Nov 2011 Location: Multiverse 6627A Device: K1 to PW3	What is the VID/PID of that "unknown device"? It may be in fastboot mode, which does not change the screen. If you set fastboot mode from diags, you should see the diags menu. You should still be able to boot to other modes using MfgTool. And you can change your bootmode idme var to main using the fastboot tool, or using diags idme command from SSH. This is all documented elsewhere (in many posts), and indexed, and summarized in a small guide for beginners. You just need to the in the right places. Start with the master index sticky. Last edited by geekmaster; 06-22-2012 at 10:45 AM.