And at last, kernel panic. :-((
Code:
U-Boot 1.3.0-rc3-lab126 (Apr 6 2011 - 17:12:22)
CPU: Freescale i.MX35 at 532 MHz
Board: MX35 Luigi [ POR]
WDOG_WCR = 0xff31
WDOG_WMCR = 0x0
Board Id: SP1B000000000000
S/N: ***
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
No ethernet found.
i.MX35 CPU board version 2.0
Net: No ethernet found.
Hit any key to stop autoboot: 0
## Booting image at 87f40400 ...
Image Name: Linux-2.6.26-rt-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2168732 Bytes = 2.1 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux.......................................................................................................................... done, booting the kernel.
boot: I def:rbt:reset=user_reboot:
2.6.26-rt-lab126 #5 Wed Apr 6 17:13:11 PDT 2011 armv6l
INFO:Using default keypad setting. (not passing "kb_rev" to module)
INFO:Loaded module /lib/modules/mxc_keyb.ko (22508 bytes)
Press [ENTER] for recovery menu... 0 /INFO:Partition table verified for /dev/mmcblk0
INFO:Loaded module /lib/modules/eink_fb_hal.ko (73284 bytes)
INFO:Loaded module /lib/modules/eink_fb_hal_broads.ko bs_orientation=0 bs_bpp=4 (124904 bytes)
INFO:Loaded module /lib/modules/eink_fb_shim.ko (128984 bytes)
INFO:eink initialized... (483328 bytes)
INFO:Loaded module /lib/modules/arcotg_udc.ko (56288 bytes)
INFO:Loaded module /lib/modules/g_file_storage.ko (40764 bytes)
Charge: 97% [#########################################################:]
Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 1 -
Menu timeout
BOOTING DEFAULT.
argc == 9
argv[0]: "kinit"
argv[1]: "console=ttymxc0,115200"
argv[2]: "mem=256M"
argv[3]: "panic=10"
argv[4]: "root=/dev/mmcblk0p1"
argv[5]: "ro"
argv[6]: "ip=none"
argv[7]: "quiet"
U-Boot 1.3.0-rc3-lab126 (Apr 6 2011 - 17:12:22)
CPU: Freescale i.MX35 at 532 MHz
Board: MX35 Luigi [ POR]
WDOG_WCR = 0xff31
WDOG_WMCR = 0x0
Board Id: SP1B000000000000
S/N: ***
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
No ethernet found.
i.MX35 CPU board version 2.0
Net: No ethernet found.
Hit any key to stop autoboot: 0
## Booting image at 87f40400 ...
Image Name: Linux-2.6.26-rt-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2168732 Bytes = 2.1 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux.......................................................................................................................... done, booting the kernel.
boot: C def:bcut:batterycut=1:
last sysfs file:$/sys/dهvéces/virüual/net/ىo/flaçs<4>Modules lioked*in: [ىcst unloaded: هink_nb_hal]
2.6.26-rt-lab126 #5 Wed Apr 6 17:13:11 PDT 2011 armv6l
INFO:Using default keypad setting. (not passing "kb_rev" to module)
INFO:Loaded module /lib/modules/mxc_keyb.ko (22508 bytes)
Press [ENTER] for recovery menu... 0 /INFO:Partition table verified for /dev/mmcblk0
INFO:Checking for updates... (auto-pilot mode)
/dev/mmcblk0p4:
CHS=4/16/100167 size=3282272256 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 24072 <large> 7688 6403000
CHS: 376/0/9 - <large>
Partition p2:
Partition p3:
Partition p4:
INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 3936256
INFO:No update*.bin found; no update needed.
INFO:no updates found.
BOOTING DEFAULT.
argc == 9
argv[0]: "kinit"
argv[1]: "console=ttymxc0,115200"
argv[2]: "mem=256M"
argv[3]: "panic=10"
argv[4]: "root=/dev/mmcblk0p1"
argv[5]: "ro"
argv[6]: "ip=none"
argv[7]: "quiet"
argv[8]: "lpj=2555904"
Running ipconfig
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=none"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: failed to identify filesystem /dev/root, trying all
kinit: trying to mount /dev/root on /root with type ext3
kinit: trying to mount /dev/root on /root with type ext2
kinit: trying to mount /dev/root on /root with type cramfs
kinit: trying to mount /dev/root on /root with type msdos
kinit: trying to mount /dev/root on /root with type vfat
kinit: Unable to mount root fs on device dev(179,1)
Checking for init: /sbin/init
Checking for init: /bin/init
Checking for init: /etc/init
Checking for init: /sbin/init.sysvinit
Checking for init: /bin/sh
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = cfab0000
[00000000] *pgd=8fa63031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1]
last sysfs file: /sys/devices/virtual/net/lo/flags
Modules linked in: [last unloaded: mxc_keyb]
CPU: 0 Not tainted (2.6.26-rt-lab126 #5)
PC is at panic+0x6c/0x12c
LR is at 0x0
pc : [<c00ce8d0>] lr : [<00000000>] psr: 60000013
sp : cf81ff58 ip : 00000000 fp : cf81ff6c
r10: 00000001 r9 : cf81e000 r8 : c00a3c28
r7 : 00000001 r6 : 00000200 r5 : cf814c40 r4 : 00000000
r3 : 00000000 r2 : c03bef3c r1 : 00000000 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387d Table: 8fab0008 DAC: 00000015
Process kinit (pid: 1, stack limit = 0xcf81e260)
Stack: (0xcf81ff58 to 0xcf820000)
ff40: cf8ecb60 cf81ff74
ff60: cf81ff94 cf81ff80 c00d1a80 c00ce874 c0358cc0 cf814c40 c03a40b4 c03a40b4
ff80: cf81e000 00000000 cf81ffa4 cf81ff98 c00d2110 c00d1a28 00000000 cf81ffa8
ffa0: c00a3a80 c00d2104 00000001 bef99fd9 00000002 00005409 00000001 01835910
ffc0: 00000001 bef99fd9 bef99f34 00000001 00000000 00000000 00000000 00000000
ffe0: 00000000 bef99f20 018211ac 01820efc 60000010 00000002 ffffffff ffffffff
Backtrace:
[<c00ce864>] (panic+0x0/0x12c) from [<c00d1a80>] (do_exit+0x64/0x614)
r3:c03a40b4 r2:c03a40b4 r1:cf814c40 r0:c0358cc0
[<c00d1a1c>] (do_exit+0x0/0x614) from [<c00d2110>] (complete_and_exit+0x0/0x24)
[<c00d20f8>] (sys_exit+0x0/0x18) from [<c00a3a80>] (ret_fast_syscall+0x0/0x2c)
Code: eb006136 e59f20b0 e3a04000 e5923000 (e5844000)
---[ end trace a073d9a2bbc086a9 ]---
Fixing recursive fault but reboot is needed!