MobileRead Forums - View Single Post - any more insight on the issue of 'loss of speaker sound' PE?

songoffire · 06-14-2012, 11:18 AM

Quick update on the no sound issue:
Still no sound through the built-in speakers, although headphones and bluetooth continue to work fine.

Measures attempted to resolve the issue (So Far) ...
1. Reboot
2. Hard Reset
3. Check if sound is disabled/muted and volume levels
4. Reinstalled the -Golden- Allmine Update
5. VOIP / SIP calls (outbound and inbound)
6. Installed Elixr to confirm that all volume levels are @ 100% (Thanks Gunner)
7. Installed ToggleHeadset(2) to manually enable/disable the headset sensor
8. Installed Volume, Volume Control, and Volume Control+ to confirm volume levels

Possible Leads
1. One interesting note is that when I check volume levels with Volume Control it tells me that "An unrecognized audio route is currently enabled"
2. The wireless headset on indicator in Elixr does not change when I plug in and unplug my wired headset. This setting does change when I use the headset toggle widget, but there is no effect on sound.

06-14-2012, 11:18 AM	#39
songoffire Member Posts: 11 Karma: 10 Join Date: May 2012 Device: Pocket Edge	Quick update on the no sound issue: Still no sound through the built-in speakers, although headphones and bluetooth continue to work fine. Measures attempted to resolve the issue (So Far) ... 1. Reboot 2. Hard Reset 3. Check if sound is disabled/muted and volume levels 4. Reinstalled the -Golden- Allmine Update 5. VOIP / SIP calls (outbound and inbound) 6. Installed Elixr to confirm that all volume levels are @ 100% (Thanks Gunner) 7. Installed ToggleHeadset(2) to manually enable/disable the headset sensor 8. Installed Volume, Volume Control, and Volume Control+ to confirm volume levels Possible Leads 1. One interesting note is that when I check volume levels with Volume Control it tells me that "An unrecognized audio route is currently enabled" 2. The wireless headset on indicator in Elixr does not change when I plug in and unplug my wired headset. This setting does change when I use the headset toggle widget, but there is no effect on sound.