|
rescue my PRS-505
my 505 was bricked because of my mistake operation on shell after adding a serial console on 505.
the failed bootlogs was below:
NBL for arm/dbmx1/ebook : Build 993 (09:35:39, 06/10/07 JST)
text = 0x10000000 - 0x1002a764
data = ROM(0x1002a764), RAM(0x8000000 - 0x8002134)
bss = 0x8002140 - 0x8003570
heap = 0x8003570 - 0x8203570
amd_nor_register_device(): NOR device 0 : AMD AM29LV160DB
nand_register_device(): NAND device 0 : SAMSUNG K9F2G08U0A
sdm table read, current block = -1
target_setup(): sdm device 0(nor0)
target_setup(): sdm device 1(sbl0)
!!! [8track.c] load_sdmimg():777: Wf load failed.
nbl_exec_linux(): sdm_querybootname(): normal_name = Linux
nbl_exec_linux(): sdm_querybootname(): recovery_name = Linux0
DIP SW2 = 0x57
target_get_hwcfg(): Disable Ethernet: ENABLE
target_get_hwcfg(): Start Diag : NO
target_get_hwcfg(): Disable Console : ENABLE
target_get_hwcfg(): Linux or Shell : LINUX
target_get_hwcfg(): Boot select : CONFIG
!!! [nblexec.c] nbl_read_config():141: cannot find nbl config partition 'nblconfig'.
!!! [nblexec.c] nbl_read_config():141: cannot find nbl config partition 'nblconf
ig'.
!!! [nblexec.c] nbl_read_config():141: cannot find nbl config partition 'nblconf
ig'.
!!! [nblexec.c] nbl_read_config():141: cannot find nbl config partition 'nblconf
ig'.
!!! [nblexec.c] nbl_read_config():141: cannot find nbl config partition 'nblconf
ig'.
!!! [nblexec.c] nbl_exec_linux():552: error: kernel select failed.
Anyone can help me save my 505.
|