View Single Post
Old 03-12-2012, 06:53 AM   #12
Markereader
Junior Member
Markereader began at the beginning.
 
Posts: 4
Karma: 10
Join Date: Mar 2012
Device: none
Wink firmware to solve the boot up problem

Quote:
Originally Posted by paco_lch View Post
Hello fellow boox users,

I've been using Boox M92 for about a week. Several days ago it failed to boot and I have had no luck bringing it back to life ever since.

I've checked this forum
https://www.mobileread.com/forums/sho...d.php?t=168842

and did the following (without any success):
- reset it many dozen times (through the hole on the back cover);
- updated firmware from original to v1.7 official and 20120224.


Here is the situation (please see attached the picture of the device):
- the boot progress bar (at the bottom of the screen) reaches the end and nothing happens (for many hours);
- the blue LED stays on forever;
- battery is fully charged (did all the manipulations while connected to power as well);
- the reset button works (after the click, the blue LED goes off and i can again power up the device with the On/Off button);
- if i press and hold the On/Off button for some 10 sec or so, the device restarts;
- firmware updates were successful (judging by different wallpaper or screensaver during the boot process);
- on the day before this glitch occured, I installed NewsFlash RSS reader (the program did not work) and used wi-fi connection (successfully). After that i used my boox for a couple of hours without any problems.


Is there any solution to this problem (except flashing the reader with nuclear EMP)?


thanks in advance!
Hi, Please download this firmware from: https://www.sugarsync.com/pf/D033292_4508877_98598

Update instruction: After you download this firmware, put it into an empty SD card( no need to unzip the firmware). You need to update the device twice. It takes around 10 minu for first time and 3 minu for second time. Please try and see if it works
Markereader is offline   Reply With Quote