View Single Post
Old 03-09-2012, 03:04 PM   #76
murz_07 began at the beginning.
Posts: 67
Karma: 10
Join Date: Feb 2012
Device: Kindle Touch SO
Originally Posted by geekmaster View Post
Okay... it looks like you have SSH installed in diags. And with you are running code as root... and you removed your serial number and other identifying info (good)... What is it you want to do here?

If you cannot boot main, you might have a bad script listed in the output messages. Or a missing script...

You can SSH in and fix the problem on the main system partition, or replace the partition with a good one with "dd" as documented may time in other posts.

You can change the bootmode from diags to main with:

idme -d --bootmode main
rm /mnt/us/ENABLE_DIAGS

What else do you want to do here?
I did "dd" mmcblk0p1 with your backup file.
I did as you said and NOTHING happend again. LED turned off and that's all.
What problem can I have and how cam I fix it using SSH?
murz_07 is offline   Reply With Quote