View Single Post
Old 02-21-2012, 08:12 AM   #153
CJY
Zealot
CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!CJY , Klaatu Barada Niktu!
 
Posts: 128
Karma: 5348
Join Date: Feb 2012
Device: Onyx Boox M92
Can somebody please verify what I think is a serious bug in the latest two firmware versions?

Using headphones give me this result:

- Lowering the volume to the first bar (i.e. lowest setting) gives - predictably - almost no sound;
- but raising the volume just one bar (i.e. the second lowest setting) ups the volume almost explosively - in fact, so high that it is unbearable to use the headphones!

- Higher settings work linearly - but given the jump at bar no. two, all levels way (!) too high to be usable.

The effect is there with the speaker too, though seemingly not as pronounced as with the headphones.

This did not happen for me with f/w 1.6, so it does not seem to be hardware related.

Somewhat irritating, as this in effect stops me from enjoying music with my reading at all. As is, it is unusable.

* * * * * * * * * * * * * *

On another note, please be aware that upgrading the f/w will delete whatever start-pages you had added before. (Not bookmarks, though, they remain intact.)
No biggie, but good to be aware.


Cheers!
CJ
CJY is offline   Reply With Quote