Thread: PRS-T1 Matte finnish?
View Single Post
Old 01-09-2012, 03:36 AM   #15
lightforx
Enthusiast
lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.lightforx for a long time would go to bed early.
 
Posts: 47
Karma: 17948
Join Date: Sep 2011
Location: Los Angeles, CA
Device: Sony PRS-T1
Quote:
Originally Posted by Bookworm_Girl View Post
Someone posted some pictures with a black matte skin in the T1 cover thread (see the link below). From photos it appears that the red is also glossy, but the white seems less so.

https://www.mobileread.com/forums/sho...&postcount=146
Those are mine so I'll give some comments.

For someone who needs stuff to be aligned perfectly, I had lots of trouble putting this on. It was also half an inch off (longer) so I had to make some adjustments using some of the left-over skin (see 4th pic, top of T1 screen). I'm not sure if it was stretched because of my pulling.

But it took the annoying glare and fingerprint problems away, so it's highly recommended!
lightforx is offline   Reply With Quote