Quote:
Originally Posted by Gunnerp245
If using the freezer/refrigerator put the PE into a large ziplock bag. After taking out of the cold leave the PE in the bag so that the condensation collects in the bag not the PE. I would stand the PE up on the long end so if there was any condensation would drain to the bottom. This is an old trick used many years ago when camcorder batteries would develop a memory and not hold a charge.
|
Thanks for the tip. Tried it last night. Decided to let the PE wait until after work today to see if it helps. The green light went to red before going into the freezer and when it came out there was no light at all. So my guess is that the battery is discharged. So will try tonight and see what happens. Thanks again.