Quote:
Originally Posted by bandanabandit88
Thanks for looking into this  Basically, I turned the device on the first time, and went through the registration process, of course getting the error. I went back, as far as I could. But the last page I can get to is Step 1 of 1 but on the youtube video, it shows that the four corners step is done before this page. I cannot get back to the first screen to press the four corners. I'm stuck in the registration process. I hope that's understandable. Thanks again!
|
Like Filark said, try resetting the Edge (use a paperclip - reset is next to USB port). If that doesn't work proceed with the Setup. According to the Quick Start Guide there may be a "Skip" option depending on the Operating System installed. Basically run the setup and when you get to the Registration Step hopefully there will be the option to skip to the next step. If this works and you are able to get to the home screen enable Digital Rights Management (DRM). Follow the instructions in my Resource Sticky.
If none of this works, the absolute last resort may be to download either the Ermine Beta or the original Dingo 1.13 build and reflash the device using a small USB thumb drive (preferably 1 GB or less) or a microSD card. Again, this is an absolute last resort. Experiment first and see if you can proceed with Setup and bypass some registration steps. If you feel like you have exhausted all options and want to reflash the eDGe, there are download links to both the original Dingo (1.13) as well as the Ermine beta along with the last two PDF instructions at the bottom of the post on how to install either version.