View Single Post
Old 11-14-2011, 02:07 PM   #99
vicinc
Guru
vicinc has a complete set of Star Wars action figures.vicinc has a complete set of Star Wars action figures.vicinc has a complete set of Star Wars action figures.vicinc has a complete set of Star Wars action figures.vicinc has a complete set of Star Wars action figures.
 
Posts: 733
Karma: 443
Join Date: May 2011
Location: UK
Device: Pocket Edgex2(1unborked), Alex, Nook B&W, Nook Color, Nook STR
also tried with unmodified golden dingo
[ 2.727932] ov3640 power on (reset inactive)
[ 2.735958] OmniVision ov3640 sensor detected
[ 2.829528] ccic_ctlr_power_down: ccic is power downed!!!
[ 2.834936] OV3640 i2c-probe detected
[ 2.884462] scsi0 : usb-storage 1-1.2:1.0
[ 2.889030] OmniVision ov7740 sensor driver, at your service
[ 3.401050] mmc0: new SD card at address 2d91
[ 3.406016] mmcblk0: mmc0:2d91 SD02G 1.83 GiB
[ 3.410633] mmcblk0:
[ 4.024861] scsi 0:0:0:0: Direct-Access Benica SQ Card 0.00 PQ: 0 ANSI: 2
[ 4.212927] sd 0:0:0:0: [sda] 4014079 512-byte logical blocks: (2.05 GB/1.91 GiB)
[ 4.309272] sd 0:0:0:0: [sda] Write Protect is off
[ 4.314083] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.720288] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.726425] sda:
[ 4.817413] sda1
[ 5.086573] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.092687] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.474524] mmc1: new high speed SDIO card at address 0001
[ 15.555942] RAMDISK: gzip image found at block 0
[ 16.185848] uncompression error
[ 16.327155] EXT2-fs (ram0): warning: checktime reached, running e2fsck is recommended
[ 16.335045] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 16.341115] Freeing init memory: 896K
[ 16.344876] EXT2-fs (ram0): error: ext2_lookup: deleted inode referenced: 4136
[ 16.352197] EXT2-fs (ram0): error: ext2_lookup: deleted inode referenced: 4098
[ 16.359630] EXT2-fs (ram0): error: ext2_lookup: deleted inode referenced: 4218
[ 16.366921] EXT2-fs (ram0): error: ext2_lookup: deleted inode referenced: 4218
[ 16.374160] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 16.386779] Rebooting in 1 seconds..

U-Boot 2009.01-rc1-svn1084 (Feb 15 2011 - 12:04:39)
Marvell version: 1.1.1.1 PXAxxx

ESI version: 2.0.3 (1) <<EdgeJr>>

MARVELL PXAXXX series.
Based on 88SV331xV5 Core with ARM926 LE CPU.
Code original base is u-boot-arm 2009.01-rc1.

DRAM: 512 MB
NAND: detect chip id d7ec on cs 0, Samsung 32Gibx8
SPI NOR: SF: Got idcode c2 20 17 c2 20
SF: Detected MX25L6405D with page size 256, total 8388608 bytes
In: serial
Out: serial
Err: serial
Net: u2o-eth
Hit any key to stop autoboot: 0
EdgeJr>>
vicinc is offline   Reply With Quote