Quote:
Originally Posted by Kolenka
If you don't know the answer, this can clear it up:
- Add a couple books to the SD card, and let the T1 load them.
- Open a book, make sure it works.
- Connect the T1 to the PC, and add a couple more books via Calibre.
- Unplug and see if the new books work or don't.
|
Kolenka, sorry for driving you off focus, perhaps I am too talkative. And you are being very helpful and
very generous. Also, I have good news: your last suggestion
worked.
Here's what I did:
- I reformatted the card (using the T1's built-in function)
- Manually added a <books> folder under <Sony_Reader><media> (perhaps this was unnecessary, after all).
- Dropped an ePub file there.
- Unplugged the T1 and waited for a few seconds for the device to recognise the new book. It did, with no problems, and everything worked OK.
- Plugged the T1 again, this time with Calibre on. Calibre identified the device (and the existing book in the card). Using Calibre I added two more books to the card.
- Unplugged again to check: now the three books are in the card, and all three of them work as expected.
Great! - Thanks, Kolenka.
Was I doing something wrong? What comes next?