hello yifanlu:
My kindle 3g has been rewritten rootfs, but the modules loaded at startup error, please help me to see how it is, how to fix? Thank you
log:
U-Boot 1.3.0-rc3-lab126 (Sep 15 2010 - 19:24:53)
CPU: Freescale i.MX35 at 532 MHz
Board: MX35 Luigi [ POR]
WDOG_WCR = 0xff31
WDOG_WMCR = 0x0
Board Id: SP1B000000000000
S/N: B006A0A004042ADB
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
No ethernet found.
i.MX35 CPU board version 2.0
Net: No ethernet found.
Hit any key to stop autoboot: 0
## Booting image at 87f40400 ...
Image Name: Linux-2.6.26-rt-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2166568 Bytes = 2.1 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux............................................. .................................................. ........................... done, booting the kernel.
boot: C def:bcut:batterycut=1:
2.6.26-rt-lab126 #5 Sat Feb 5 19:05:05 PST 2011 armv6l
INFO:Using default keypad setting. (not passing "kb_rev" to module)
INFO:Loaded module /lib/modules/mxc_keyb.ko (22508 bytes)
Press [ENTER] for recovery menu... 0 /INFO:Partition table verified for /dev/mmcblk0
INFO:Checking for updates... (auto-pilot mode)
/dev/mmcblk0p4:
CHS=4/16/101575 size=3328409600 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6500784
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192
INFO:No update*.bin found; no update needed.
INFO:no updates found.
BOOTING DEFAULT.
argc == 9
argv[0]: "kinit"
argv[1]: "console=ttymxc0,115200"
argv[2]: "mem=256M"
argv[3]: "panic=10"
argv[4]: "root=/dev/mmcblk0p1"
argv[5]: "ro"
argv[6]: "ip=none"
argv[7]: "quiet"
argv[8]: "lpj=2555904"
Running ipconfig
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=none"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
Checking for init: /sbin/init
Checking for init: /bin/init
Checking for init: /etc/init
Checking for init: /sbin/init.sysvinit
INIT: version 2.86 booting
system: I rcS:def:starting /etc/rcS.d/S02kdb
system: I S02kdb:def:Setting boot device to mmcblk0
kdb set: 'system/driver/filesystem/DEV_ROOT'
system: I rcS:def:starting /etc/rcS.d/S03udev
system: I S03udev:def:setting up virtual fs for hotplug event handling
system: I S03udev:def:starting the hotplug events dispatcher
system: I S03udev:def:synthesizing initial hotplug events
lipc-send-event[380]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[380]: C def:dbusi::Failed to init dbus
lipc-send-event[380]: E def
pen::Failed to open LIPC
lipc-send-event[380]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[478]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[478]: C def:dbusi::Failed to init dbus
lipc-send-event[478]: E def
pen::Failed to open LIPC
lipc-send-event[478]: E def:fail:source=com.lab126.hal, event=audioHS:Sending event failed
system: I rcS:def:starting /etc/rcS.d/S04rootfsresize
system: I S04rootfsresize:def:No rootfs on /dev/mmcblk0p1 resizing needed
system: I rcS:def:starting /etc/rcS.d/S10filesystems
system: I rcS:def:starting /etc/rcS.d/S10hostname
system: I rcS:def:starting /etc/rcS.d/S10network
system: I S10filesystems:def:mounting filesystems
system: I S10hostname:def:setting device hostname
system: I S10network:def:initializing network configuration
system: I S10network:def:Installed Firewall
system: I rcS:def:starting /etc/rcS.d/S11chpriority
system: I rcS:def:starting /etc/rcS.d/S11video
Unknown HZ value! (77) Assume 100.
system: W S11chpriority:def:Cannot set priority for IRQ-7
system: I S11video:def:initializing eInk HAL for system use
system: I S11video:def:eink_debug=0
system: I S11video:def:Controller set to broads
insmod: error inserting '/lib/modules/2.6.26-rt-lab126/kernel/drivers/video/eink/hal/eink_fb_hal.ko': -1 Invalid module format
insmod: error inserting '/lib/modules/2.6.26-rt-lab126/kernel/drivers/video/eink/hal/eink_fb_hal_broads.ko': -1 Invalid module format
insmod: error inserting '/lib/modules/2.6.26-rt-lab126/kernel/drivers/video/eink/legacy/eink_fb_shim.ko': -1 Invalid module format
system: C S11video:def:could not start video, halting
shutdown: /dev/initctl: No such file or directory
init: /dev/initctl: No such file or directory
system: I rcS:def:starting /etc/rcS.d/S20syslog-ng
system: I S20syslog-ng:def:starting syslog-ng
system: I rcS:def:starting /etc/rcS.d/S21init_time
system: I S21init_time:initboot:time=10020:boot time after init in milliseconds
system: I rcS:def:starting /etc/rcS.d/S45modules
system: I S45modules:def:loading module mwan
FATAL: Error inserting mwan (/lib/modules/2.6.26-rt-lab126/kernel/drivers/net/wan/mwan.ko): Invalid module format
system: C S45modules:def:failed to load module mwan
system: I S45modules:def:loading module g_file_storage
WARNING: Error inserting arcotg_udc (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/gadget/arcotg_udc.ko): Invalid module format
FATAL: Error inserting g_file_storage (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/gadget/g_file_storage.ko): Invalid module format
system: C S45modules:def:failed to load module g_file_storage
system: I S45modules:def:loading module fuse
FATAL: Error inserting fuse (/lib/modules/2.6.26-rt-lab126/kernel/fs/fuse/fuse.ko): Invalid module format
system: C S45modules:def:failed to load module fuse
system: I S45modules:def:loading module uinput
FATAL: Error inserting uinput (/lib/modules/2.6.26-rt-lab126/kernel/drivers/input/misc/uinput.ko): Invalid module format
system: C S45modules:def:failed to load module uinput
system: I S45modules:def:loading module mxc_keyb
FATAL: Error inserting mxc_keyb (/lib/modules/2.6.26-rt-lab126/kernel/drivers/input/keyboard/mxc_keyb.ko): Invalid module format
system: C S45modules:def:failed to load module mxc_keyb
system: I S45modules:def:loading module fiveway
FATAL: Error inserting fiveway (/lib/modules/2.6.26-rt-lab126/kernel/drivers/input/fiveway/fiveway.ko): Invalid module format
system: C S45modules:def:failed to load module fiveway
system: I S45modules:def:loading module volume
FATAL: Error inserting volume (/lib/modules/2.6.26-rt-lab126/kernel/drivers/input/volume/volume.ko): Invalid module format
system: C S45modules:def:failed to load module volume
system: I rcS:def:starting /etc/rcS.d/S50system
mount: mount point /proc/bus/usb does not exist
Sat Jul 31 00:00:00 UTC 2010
system: I rcS:def:starting /etc/rcS.d/S55scroll
system: I S55scroll:def:skipping; no luigi-based work to do here
system: I rcS:def:starting /etc/rcS.d/S70ethernet
system: I rcS:def:starting /etc/rcS.d/S70userstore
system: I S70ethernet:def:not enet
system: I S70ethernet:def:not usbnet
dosfsck 2.11-lab126 (1 Jun 2007)
dosfsck 2.11-lab126, 1 Jun 2007, FAT32, LFN
Checking we can access the last sector of the filesystem
Boot sector contents:
System ID "mkdosfs"
Media byte 0xf8 (hard disk)
512 bytes per logical sector
8192 bytes per cluster
32 reserved sectors
First FAT starts at byte 16384 (sector 32)
2 FATs, 32 bit entries
1624064 bytes per FAT (= 3172 sectors)
Root directory start at cluster 2 (arbitrary size)
Data area starts at byte 3264512 (sector 6376)
405900 data clusters (3325132800 bytes)
32 sectors/track, 64 heads
0 hidden sectors
6500784 sectors total
Checking for unused clusters.
Checking free cluster summary.
/dev/loop/0: 21 files, 6159/405900 clusters
fuse: device not found, try 'modprobe fuse' first
system: I rcS:def:starting /etc/rcS.d/S73loc-init
system: I S73loc-init:def:[/mnt/us/localization not found] Localization update is disabled
system: I rcS:def:starting /etc/rcS.d/S76launchpad
system: I rcS:def:starting /etc/rcS.d/S90video
system: I S90video:def:initializing eInk HAL for system use
system: I S90video:def:eink_debug=0
system: I S90video:def:Controller set to broads
insmod: error inserting '/lib/modules/2.6.26-rt-lab126/kernel/drivers/video/eink/hal/eink_fb_hal.ko': -1 Invalid module format
insmod: error inserting '/lib/modules/2.6.26-rt-lab126/kernel/drivers/video/eink/hal/eink_fb_hal_broads.ko': -1 Invalid module format
insmod: error inserting '/lib/modules/2.6.26-rt-lab126/kernel/drivers/video/eink/legacy/eink_fb_shim.ko': -1 Invalid module format
system: C S90video:def:could not start video, halting
shutdown: /dev/initctl: No such file or directory
init: /dev/initctl: No such file or directory
INIT: Entering runlevel: 2
system: I S40diags:def:not starting Diagnostic Services
system: I S40diags:def:/mnt/base-us/ENABLE_DIAGS does not exist, forcing diagnostic disable
system: I S50battcheck:def:running
system: C S50battcheck:def:/sys/devices/platform/fsl-usb2-udc/voltage not found. Aborting battcheck
INIT: Switching to runlevel: 5
INIT: Sending processes the TERM signal
system: I wifi:def:WiFi Device mac = 28:EF:01:0C:78:B7
Platform set to SHASTA_NATIVEMMC-SDIO
Platform Setup Script is: /opt/ar6k/host/support/platformscripts/plat_SHASTA_NATIVEMMC-SDIO.sh
Image path: /sbin
No debug record limit set
FATAL: Error inserting ar6000 (/lib/modules/2.6.26-rt-lab126/kernel/drivers/net/wireless/ath6k22.133/ar6000.ko): Invalid module format
*** Failed to install AR6K Module
/opt/ar6k/host/support/platformscripts/plat_SHASTA_NATIVEMMC-SDIO.sh: exit: line 32: Illegal number: -1
Platform script failed : loadAR6K
/opt/ar6k/host/support/loadAR6000.sh: exit: line 244: Illegal number: -1
system: I wifi:def:loadAR6000 finished, args=()
system: I wpa_supplicant:def:wpa supplicant started
system: I S30network:def:initializing network configuration
system: I S30network:def:Installed Firewall
system: I wancontrol
c
rocessing "wanon"
/usr/sbin/wancontrol: line 1: cannot create /proc/wan/power: nonexistent directory
/usr/sbin/wancontrol: line 1: cannot create /proc/wan/usb: nonexistent directory
FATAL: Error inserting usbcore (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/core/usbcore.ko): Invalid module format
mount: mount point /proc/bus/usb does not exist
WARNING: Error inserting mwan (/lib/modules/2.6.26-rt-lab126/kernel/drivers/net/wan/mwan.ko): Invalid module format
WARNING: Error inserting usbcore (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/core/usbcore.ko): Invalid module format
FATAL: Error inserting ehci_hcd (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/host/ehci-hcd.ko): Invalid module format
WARNING: Error inserting usbcore (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/core/usbcore.ko): Invalid module format
FATAL: Error inserting usbserial (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/serial/usbserial.ko): Invalid module format
WARNING: Error inserting mwan (/lib/modules/2.6.26-rt-lab126/kernel/drivers/net/wan/mwan.ko): Invalid module format
WARNING: Error inserting usbcore (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/core/usbcore.ko): Invalid module format
WARNING: Error inserting ehci_hcd (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/host/ehci-hcd.ko): Invalid module format
WARNING: Error inserting usbserial (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/serial/usbserial.ko): Invalid module format
FATAL: Error inserting option (/lib/modules/2.6.26-rt-lab126/kernel/drivers/usb/serial/option.ko): Invalid module format
system: E wancontrol:usdf:USB serial device failure
system: E wancontrol:wspf:WAN USB serial port failure -- aborting
/usr/sbin/wancontrol: line 1: cannot create /proc/wan/power: nonexistent directory
system: E S50wan:wpuf1:WAN power-up failure (1)
system: I S60dbus:def:starting system message bus
Starting Process Monitoring Daemon: Retrieved 127 keys for system/daemon/pmond/
Starting Power Management Daemon: system: I S70wifid:def:starting wifid
system: I S70cmd:def:starting CMD daemon
system: I S70wand:def:starting WAN daemon
system: I S75phd:def:Starting Phone-Home Daemon
system: I S76mcsd:def:starting MCS server
system: I S80volumd:def:starting Volume daemon
system: I S85audio:def:initializing audio driver defaults
No state is present for card mx35luigi
system: I S85audio:def:starting audio server
system: I S87ttsd:def:starting TTS daemon
Battery Level: 8%
Sat Jul 31 00:00:29 2010 INFO:battery charge: 8%
system: I S90cron:def:starting crond
Starting lipc-daemon: system: I S90tmd:def:Starting Transfer Manager Daemon
system: I S94browserd:def:Starting Browser Daemon
system: I S95framework:def:starting booklet framework
system: C S95framework:def:not starting framework on account of no screen
system: I S96boot_finished:def:Boot finished script running
system: I S96boot_finished:symboot:time=41450:boot time before framework starts, in milliseconds
system: I mntroot:def:Making root filesystem read-only
Welcome to Kindle!
kindle login: root
#################################################
# N O T I C E * N O T I C E * N O T I C E #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@kindle root]#
Thank you very much!