MobileRead Forums - View Single Post

ivanjt · 07-20-2011, 04:45 PM

Yellowman1, what exactly are you trying to achieve?

If all you want to do is transfer files to and from your EE via USB then you need the EE running before you plug it into the PC. The PC will see the USB device but you also have to enable the USB on the EE. If you are using Ermine then the LCD screen will show USB attached with a botton near the bottom of the screen that will activate it. When you have done this you will be able to see what is on the EE.

Don't forget to correctly disconnect the USB from your PC and shut down the USB on the EE.

In fact it is all in the manual.

07-20-2011, 04:45 PM	#15
ivanjt Guru Posts: 858 Karma: 1027478 Join Date: Aug 2010 Location: South of France Device: kindle dx; eDGe	Yellowman1, what exactly are you trying to achieve? If all you want to do is transfer files to and from your EE via USB then you need the EE running before you plug it into the PC. The PC will see the USB device but you also have to enable the USB on the EE. If you are using Ermine then the LCD screen will show USB attached with a botton near the bottom of the screen that will activate it. When you have done this you will be able to see what is on the EE. Don't forget to correctly disconnect the USB from your PC and shut down the USB on the EE. In fact it is all in the manual.