|
After cleaning the entire 505 with a LCD wipe I took my 505 to the office and shrink wrapped the whole device. I then gently used a heat gun to shrink the plastic on the device. After shrinking the plastic I then used a razer blade to cut the necessary holes for the USB, AC adapter ports as well as the SD card slot. If needed in the future I will cut additonal holes for the MS slot and the headphone slot. At this time I have no need for these ports/slots.
I have the optional Sony case for the unit and use a Great Point LED light - both sold by Sony and Purchased from Sony.
The shrink wrap offers great protection and guard against dust and spills. I will however offer a word of warning. When I used the LCD wipe on around the buttons I noticed that the wipe appeared to remove some of the ink from the bookmark button - so I stopped wiping the inked areas. I would suggest that this occurred most likely because Sony is using some type of Soy ink.
If you have access to a shrink wrap machine I highly suggest that you take advantage of the security that it provides.
|