MobileRead Forums - View Single Post

Emalieee · 05-02-2011, 12:30 PM

My Kobo (wifi version) had run out of juice, so I plugged it in to my computer to charge it. While charging, the desktop app recognized that the reader was plugged in and allowed me to sync new books. It then asked me to update the reader's software, and I clicked "yes."

And that's where it all went downhill.

Sometime during the update process, the computer stopped recognizing the device and my Kobo kept looping through the "updating" screen. After about an hour of this, I unplugged it (there was no option to safely remove hardware), and powered my Kobo off. While off, it displayed a static version of the updating screen. Once turned back on, the startup screen appears (ereading: anytime. anyplace) and the loading blocks at the bottom light up. Unfortunately, that's as far as it gets.

I've tried resetting it by pushing the power button for 8 seconds, and then pushing it down again; holding down the power, menu, and d-pad buttons; and using the reset button at the back of the device (multiple times). Every time, it stays on the startup screen, and the blocks keep lighting up over and over again. If I turn it off, it just shows a static version of the startup screen.

I tried charging it fully, and that seems to have made zero difference. Also, the device is just under 2 months old, but I live in Canada and Chapters has a 14-day return policy, so they're of no help to me. I've also contacted Kobo's help desk, but from what I've heard, they take forever to respond.

Any ideas?

05-02-2011, 12:30 PM	#1
Emalieee Junior Member Posts: 3 Karma: 10 Join Date: May 2011 Device: Kobo	Dead Kobo? My Kobo (wifi version) had run out of juice, so I plugged it in to my computer to charge it. While charging, the desktop app recognized that the reader was plugged in and allowed me to sync new books. It then asked me to update the reader's software, and I clicked "yes." And that's where it all went downhill. Sometime during the update process, the computer stopped recognizing the device and my Kobo kept looping through the "updating" screen. After about an hour of this, I unplugged it (there was no option to safely remove hardware), and powered my Kobo off. While off, it displayed a static version of the updating screen. Once turned back on, the startup screen appears (ereading: anytime. anyplace) and the loading blocks at the bottom light up. Unfortunately, that's as far as it gets. I've tried resetting it by pushing the power button for 8 seconds, and then pushing it down again; holding down the power, menu, and d-pad buttons; and using the reset button at the back of the device (multiple times). Every time, it stays on the startup screen, and the blocks keep lighting up over and over again. If I turn it off, it just shows a static version of the startup screen. I tried charging it fully, and that seems to have made zero difference. Also, the device is just under 2 months old, but I live in Canada and Chapters has a 14-day return policy, so they're of no help to me. I've also contacted Kobo's help desk, but from what I've heard, they take forever to respond. Any ideas?