MobileRead Forums - View Single Post - Instructions for obtaining the root to the pocketbook 60x/90x

ed007 · 04-26-2011, 05:36 PM

It happened! mamaich wrote:
We now have:
- getting a local shell with Root on the device (but this will agree, it is inconvenient, since pocket term curve to the horror)
- raising FTP and telnet daemon (use "full"busybox, rather than a castrato from the firmware), which is now possible to pick up the WiFi to the device remotely via FTP or Telnet, and wield it as root. That is - the main thing that I personally was not enough.
Immediately, I note for root you will not need any soldering anything or make changes to the firmware, nor do any of these "low-level bullying" over the device.
All that is necessary - unzip the archive here: http://www.multiupload.com/A49K088F4J the root of the built-in memory, thus the files form the directory / mnt/ext1/applications and / mnt/ext1/system/bin on the device .
After this, run the application get_root, it will get root, include WiFi and connect to your wireless point (of course, WiFi should be pre-configured). And then you get the opportunity to work with the device via FTP and telnet simply connect to a PC to its IP address.

http://www.the-ebook.org/forum/viewt...er=asc&start=0

04-26-2011, 05:36 PM	#1
ed007 Member Posts: 19 Karma: 10 Join Date: Apr 2011 Device: pocketbook 603a	Instructions for obtaining the root to the pocketbook 60x/90x It happened! mamaich wrote: We now have: - getting a local shell with Root on the device (but this will agree, it is inconvenient, since pocket term curve to the horror) - raising FTP and telnet daemon (use "full"busybox, rather than a castrato from the firmware), which is now possible to pick up the WiFi to the device remotely via FTP or Telnet, and wield it as root. That is - the main thing that I personally was not enough. Immediately, I note for root you will not need any soldering anything or make changes to the firmware, nor do any of these "low-level bullying" over the device. All that is necessary - unzip the archive here: http://www.multiupload.com/A49K088F4J the root of the built-in memory, thus the files form the directory / mnt/ext1/applications and / mnt/ext1/system/bin on the device . After this, run the application get_root, it will get root, include WiFi and connect to your wireless point (of course, WiFi should be pre-configured). And then you get the opportunity to work with the device via FTP and telnet simply connect to a PC to its IP address. http://www.the-ebook.org/forum/viewt...er=asc&start=0