Quote:
Originally Posted by bhartman36
Even if you can't get into host mode, you should be able to get into recovery mode. Hold down Power + Home at the same time while you're plugging in the Craig to the USB. Then you should be able to flash the unit with the firmware, resurrecting it. I recommend flashing it with this firmware. The flashing tool can be found here.
Let me know if you need help. Basically, you're going to run RKBatchUpgrade.exe and choose your img file as the Image to feed the program. After a few minutes, your unit should be flashed, and you should be good to go.  |
Thanks for the reply.
I basically did what you suggested, but I followed the directions I found
here where Miss Spacy had a similar problem to mine. Like her, when I plugged my 738a into the PC (even after loading the driver for it) it never showed up in a window or as a drive. Using the RKBatchUpgrade program did the trick and I'm now running the 4.3 firmware.
Did Z4Root zap my 738a or was it just coincidence? I see you have recommended those same backup instructions.