MobileRead Forums - View Single Post

zoran · 10-27-2010, 02:14 AM

http://www.2wire.com/pages/pdfs/2701HG_user_guide.pdf
I assume there is some misconfiguration, since another poster have it
up and working. Just check all options and be sure there is no mac fil-
teriing or if you have it on, is the correct mac address added. Set it
to one protocol only, i.e. "g". I would use wpa2 aes with 26+ pass. Set
name servers correctly and be sure your reader gets IP address, static
or dynamic. My best bet is that your router does not give address as
it should. For that check dhcp section.
Best regards.

10-27-2010, 02:14 AM	#12
zoran himself Posts: 576 Karma: 11226 Join Date: May 2010 Device: Kobo	http://www.2wire.com/pages/pdfs/2701HG_user_guide.pdf I assume there is some misconfiguration, since another poster have it up and working. Just check all options and be sure there is no mac fil- teriing or if you have it on, is the correct mac address added. Set it to one protocol only, i.e. "g". I would use wpa2 aes with 26+ pass. Set name servers correctly and be sure your reader gets IP address, static or dynamic. My best bet is that your router does not give address as it should. For that check dhcp section. Best regards.