MobileRead Forums - View Single Post

jtag · 10-19-2007, 07:09 AM

Hi,

Is anyone still interested in the pinout of JTAG on the Iliad? I mapped them out, but still have to verify they work. Just want to see if there is demand. The connector is the one that is not connected at the edge of the board. Actually it is a dual connector that is present on both sides of the board, both with the JTAG pins (also for the Xilinx).

10-19-2007, 07:09 AM	#1
jtag Junior Member Posts: 3 Karma: 27 Join Date: Oct 2007 Device: irex	JTAG & console UART Pinout Hi, Is anyone still interested in the pinout of JTAG on the Iliad? I mapped them out, but still have to verify they work. Just want to see if there is demand. The connector is the one that is not connected at the edge of the board. Actually it is a dual connector that is present on both sides of the board, both with the JTAG pins (also for the Xilinx). Attached Thumbnails Last edited by jtag; 10-23-2007 at 05:44 PM.