Update: After some searching I found that only 1gb SD cards work, but still mine didn't. As to why a simple 128mb CF failed to work, I still have no idea)
Decide to shake the dust from my iLiad (which gets no love between my 3.6" WVGA winMo phone:books and my 12.1" tablet: graphic novels).
I loaded up some books on a 128mb Kingston CF and it's not showing up in the iLiad? Formatted the card to FAT, and no go again. Go, grabbed one of my 4gb microSDHC cards (with an SD adapter, same thing. Tried an older 2gb microSD, same. Went for a 1gb SD, no go.
I put the 4gb microSD in a USB card reader, works great. Dug up an old 16mb CF, works ok.
Any ideas?
I'm lousy at debugging Linux, so the best info I got is from dmesg:
Code:
ide0: reset: success
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=241264996, sector=0
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=241264996, sector=0
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=241264996, sector=0
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=241264996, sector=0
ide0: reset: success
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=241264996, sector=0
end_request: I/O error, dev 03:01 (hda), sector 0
FAT: unable to read boot sector
FAT: freeing iocharset=utf8
Changing CPU frequency to 99 Mhz (PXbus=50Mhz).
MMC:Configured GPIO 07 (SDD) as input.
MMC:Configured GPIO 73 (SDWP) as input.
MMC:Configured GPIO 06 (SDCLK) to alternate function 1.
MMC:Configured GPIO 08 (CS) as output.
mmca:end_request: I/O error, dev f1:00 (mmc_block), sector 0
Kernel: WACOM Off
hda: SanDisk SDCFB-16, ATA DISK drive
ide0 at 0xf6000000-0xf6000007,0xf600000e on irq 67
hda: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32
hda: hda1
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: hda1
hda: hda1