Problem with Sony PRS-950 screen
 

After replacing broken screen in my Sony PRS-950 (screen model: LB071WS1-RD02), it doesn't work properly. It show text from right to left with "mirroring" , so I must use mirror to read what is on the screen . I've downloaded from web Sony's official service manual, it says, that after replacing such part as screen, I should re-enter Vcom and LUT (from the label of new screen) in "test mode". To enter "test mode" there is a need to put file to the reader. I've tried to find this file with no success. Service manual says : "Note:Confirm the method of obtaining the file for test mode to each ser-vice headquarters". But Sony give no answer for my inquiry. If somebody have an experience of replacing screen in PRS-950 or can advise how to obtain file for test mode/enter Vcom, LUT please, help me!

See #7 of this post
HTH
Mark

Mark Nord, thanks for link! This code works on my PRS-950! Code: ccE$F_h^fGs#=-M]PphW8[Ap4$%]e@Zo!.v9!S9{a)Rt8kN-Wk{2jZJ=^nPZqA@3e enables test mode.

Glad to be of assistance, and thanks for the feedback.
I hope you got your screen right, after entering the new values.

It never ceases to amaze me how wonderful the community here is willing to successfully assist with these kind of problems. Thank you Mark Nord and all those other wonderful members of MobileRead that make me want to come back every day since 2007 when I got started with my Sony PRS-500.

This thread is an AWESOME example of community!