多看2012 Installation
Guide for the Kindle Touch
Adapt
Version: Kindle Touch, 5.0.0 - 5.0.4, 5.1.0 Document Date: 2012.05.09
documentation of: DuoKan the development group
The report
recommends that: to see more forums http://bbs.duokan.com/
Revision
History:
2012.04.17
initial version
2012.04.19
added a concise description of
2012.05.07
Zeng and FAQ content
2012.05.09
add the installation interface picture, screen saver FAQ description
Description:
This
installation guide applies only to see more in the Kindle Touch installation.
Does not
apply to the K3,, K4. Upgrade instructions see Appendix FAQ. If in doubt, go to
the feedback forum.
[Primary
emphasis] is recommended to install directly in the Kindle native system to see
more
Installation
to see more do not need to jailbreak or finished. On the contrary, Chinese, or
escape to modify the Kindle original system files, resulting in the
installation DuoKan failure. Therefore, if you have previously installed the
jailbreak or finished is recommended that you uninstall jailbreak or finished.
[Two
sentences concise description of the installation steps]
(1) copy the
installation files, Ba USB cable, restart the Kindle Touch,.
Debug mode by
triple-clicking (referred to as of DDQ) to see more automatically install them.
[Graphic Detailed installation steps]
(1) copy the
installation files, restart the Kindle Touch,
1.1 Connect
USB cable to copy the installation files to the Kindle disk; pop-up Kindle
disk, Ba USB cable.
Copies of the
documents listed below (see picture):
Folder:
DK_System In file diagnostic_logs: ENABLE_DIAGS data.tar.gz
|
|
|
Figure
1 |
1.2 restart
the Kindle Touch.
If you do not
know how to restart the Touch, see the chart, find the Restart menu. Operation
as follows:
(1) Press the
HOME button (physical button) to return to the main page
(1) Click the
Menu pop-up menu
(2) Click the
Settings pop-up system settings (Figure 2)
(3) Click the
Menu pop-up menu (Figure 3)
4) click
Restart to restart (Figure 4)
|
|
|
Figure 2 |
|
|
|
Figure 3 |
|
|
|
Figure 4 |
Debug mode by
triple-clicking the menu, the installation to see more
2.1 Click D)
Exit, Reboot or Disable Diags (Figure 5 Figure 6)
2.2 Click on
D) the Disable Diagnostics (Figure 7)
2.3 Click on
Q) To continue (Figure 8)
Touch
automatically enter the installation interface, and wait about 3-5 minutes
installed.
The
installation process does not require manual operation. Installation interface
(Figure 9-11).
Installed
will automatically restart, and then enter to see more of the system.
|
|
|
Figure 5 |
|
|
|
Figure 6
(Click on the first under D) |
|
|
|
Figure 7
(Click on the second under D) |
|
|
|
Figure 8
(Click under the third Q) |
|
(The
following is the installation interface automatically, without manual
intervention) |
|
|
|
Figure 9
(automatic installation interface) |
|
|
|
Figure 10
(automatic installation interface) |
|
|
|
Figure 11
(automatic installation interface) |
|
|
|
Figure 12
(DuoKan 2012 startup screen) |
Appendix: Frequently Asked Questions FAQ
(Frequently Asked Question)
Q1 manually upgrade see more?
After
installation DuoKan the system, manually upgrade DuoKan the new version of the
following steps:
(1)
download the upgrade package, unpack DK_System
(2)
connect the USB cable, a complete copy coverage DK_System file folder
(3)
Unplug the USB cable
(4)
reboot the system will automatically install the upgrade, about 3 minutes to
upgrade is completed
Q2 DuoKan how to customize the screen
saver file?
Screensavers
pictures placed in the following directory, screensavers randomly display
pictures. DK_Syste m \ x Kindle \ res \ ScreenSaver
Q3 card trees screen how to solve
the installation process?
Kindle
boot a tree screen to refresh the image of the normal start, the startup is
complete, and will automatically switch to the program. Not been stuck in a
tree screen.
If
you encounter during the installation process, if the card is a tree screen
more than three minutes, the screen does not change. Not have access to more
than to see the fireworks interface, and plug in the USB cable can recognize
Kindle disk.
Solved as
follows: long press the shutdown button (10 seconds), wait for the machine to
enter to see more.
Q4 installation
process encountered a difficult problem to solve?
Please
add the technical staff QQ:
2399479743
1970427868
280
296 959
553
734 807
Note:
specify your Touch version number, the specific what kind of operation results
is not installed on.
Q5. Quickly press the power button
and can not switch exit the screen saver?
The
power button on the Kindle screen saver function, response speed for 2 seconds.
Therefore, in quick succession press the power button to switch and exit the
screensaver, system will automatically ignore the key messages. Need to wait
for three seconds later, again the key will have a response.
Kindle
self-diagnosis function, continuous short press the power button repeatedly,
the system will start the system diagnostics, and restart.