Register Guidelines E-Books Search Today's Posts Mark Forums Read

Go Back   MobileRead Forums > E-Book Readers > Alternative Devices

Notices

Reply
 
Thread Tools Search this Thread
Old 02-19-2010, 04:05 PM   #1
astyanax
Junior Member
astyanax began at the beginning.
 
Posts: 1
Karma: 10
Join Date: Feb 2010
Device: none
SmartQ V7 - anyone tried the Android 2.0 update?

Accoridng to this thread about the V7, on page 6 there is a link to what claims to be Android 2.0 firmware at http://en.smartdevices.com.cn/Suppor...001/14-55.html

Thinking of getting this device, as I'm quite tired of waiting for the Archos 7 Android to get a release date, and if the V7 really runs android 2.0 that would probably meet my needs (5" seems like a waste).

Has anyone tried the update? Can you offer any claims on whether the device is usable as a result?
astyanax is offline   Reply With Quote
Old 04-03-2010, 06:20 PM   #2
eastbayarb
Member
eastbayarb began at the beginning.
 
Posts: 16
Karma: 10
Join Date: Jun 2008
Device: Amazon Kindle
Quote:
Originally Posted by astyanax View Post
Accoridng to this thread about the V7, on page 6 there is a link to what claims to be Android 2.0 firmware at http://en.smartdevices.com.cn/Suppor...001/14-55.html

Thinking of getting this device, as I'm quite tired of waiting for the Archos 7 Android to get a release date, and if the V7 really runs android 2.0 that would probably meet my needs (5" seems like a waste).

Has anyone tried the update? Can you offer any claims on whether the device is usable as a result?


I am thinking of upgrading my V7 to android 2.0. I don't even know how to do it!
eastbayarb is offline   Reply With Quote
 
Advertisement
Old 04-04-2010, 02:18 AM   #3
ColdSun
Developer/Device Reviews
ColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongueColdSun can tie a knot in a cherry stem with his or her tongue
 
ColdSun's Avatar
 
Posts: 588
Karma: 22183
Join Date: Jun 2007
Location: Phoenix, AZ
Device: Sony Xperia Tablet Z, Kindle Paperwhite 2, Lenovo Yoga 8, IPad 3
This is not Android 2.0, but version 2.0 of the SmartQ V7 firmware with Android. I believe it is Android 1.6 or something.
ColdSun is offline   Reply With Quote
Old 04-04-2010, 03:30 AM   #4
Dave_S
What Title ?
Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.Dave_S ought to be getting tired of karma fortunes by now.
 
Posts: 1,325
Karma: 1856232
Join Date: Jan 2009
Location: Bavaria Germany
Device: Sony Experia Z Ultra
Quote:
Originally Posted by ColdSun View Post
This is not Android 2.0, but version 2.0 of the SmartQ V7 firmware with Android. I believe it is Android 1.6 or something.
Yes, it is Android 1.6, and the current SmartQ Android 1.6 revision is up to 3.0 now.
http://www.jiongtang.com/fourm/viewt...hp?f=33&t=1164
Dave_S is offline   Reply With Quote
Old 04-11-2010, 03:04 AM   #5
jtworld
Member
jtworld began at the beginning.
 
Posts: 10
Karma: 10
Join Date: Jul 2009
Device: SmartQ5
Android 2.0 is developing , there is video on V5 leaked
jtworld is offline   Reply With Quote
Old 04-11-2010, 05:23 AM   #6
eastbayarb
Member
eastbayarb began at the beginning.
 
Posts: 16
Karma: 10
Join Date: Jun 2008
Device: Amazon Kindle
Android 3.0 seems to work pretty good for now
eastbayarb is offline   Reply With Quote
Old 04-28-2010, 12:55 PM   #7
sws-vinpa
SmartQ V7 Interrogator
sws-vinpa began at the beginning.
 
Posts: 1
Karma: 10
Join Date: Apr 2010
Location: Niagara Falls, Ontario
Device: SmartQ V7
Yes, Android 2.0 on SmartDevices.com.cn is THEIR OWN version which is not actually ANDROID 2.0. However, there is now Android-3.0 (100331) from SmartDevices which is Android 1.6.


Now, for MY issue.. :P

I recently flashed my SmartQ V7 with JP's Covia firmware (made for SmartQ 5). Little did I consider: this seemed to do a number on my device.

Before I tried flashing the most recent Covia 1.5 (100331), I renamed the file from SmartQ5 to SmartQV7_AD, which is required for my device. The flashing started out which appeared to be working, then quickly jumped from 13% to 100% in a second. I had a suspicious feeling about this, but then wanted to boot into Android to see if the changes had taken affect.

Nil.

It was still the same version I was previously running - SmartDevices Android 3.0 Firmware (100214). So I tried flashing it with Covia's firmware again, only this time the device would freeze while jumping to and loading kernel at offset 4000000. I think this is similar to what happened to ValdikSS.

The deleted partition was a 120MB "hidden partition" which holds a less than 1MB bootloader (tcpboot), and an 8MB Linux kernel. From my experience, but correct me if I'm wrong, I would say this is what loads up the firmware upgrade (pressing and holding MENU and POWER together).

I was not in a comfortable place (and still am not at current time - 100428). After going through the boot process a dozen times, I noticed FWDN in a terminal connected to the device's RS232 port. Looked into FWDN and found a restore tool which, well, restores the hidden partition and loads the bootloader ROM and kernel ROM required for flashing. After messing around for a while, it happened to work. However, I did need a USB A-Male to A-Male for the connection between my PC and device.

Awesome - so now things are looking good. Reflash all 3 firmwares (Wince, Ubuntu, Android). Takes some time, but we're good. Try to boot into Android, no dice. "Cannot find /system/...". Okay - why not? Can't execute any of the required system bins on startup, no shell prompt, nothing. So I try Linux and Windows, they both work. Try flashing just Android again, and while scanning the quick flashing sequence, "Cannot find /dev/ndda6..." blah-blah-blah. So then I try the FWDN tool again, only this time realizing that it only creates the first four partitions, ndda1-ndda4. After a whole sh*tload of reading and indulging, I realize that ndda5 is used by Linux as a swap partition. The command that failed when flashing Ubuntu: "Cannot .../mkswap /dev/ndda5 - no such file or directory."

Son of a b*tch.

So now this is basically where I am stuck. Can you relocated Android's install partitions? Can you somehow get ndda6, ndda7, ndda8 back? This just happened late yesterday, so I should have some answers by the end of today.


Thanks!

sws.


[UPDATE]
Here is the output while trying to flash Android (SmartQV7_AD):
[NAND ] [NB Area:4MB][DT Area:1796MB][HD Area0:120MB]
ndda: ndda1 ndda2 ndda3 ndda4
[tcc_nand] init ndd(TCC8900, V7000)
TRACE: DPM is now installed
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
tcc-ohci tcc-ohci: TCC OHCI
tcc-ohci tcc-ohci: new USB bus registered, assigned bus number 1
tcc-ohci tcc-ohci: irq 49, io mem 0xf0500000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dwc_otg: version 2.60a 22-NOV-2006
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 2
dwc_otg dwc_otg.0: irq 48, io mem 0x00000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
mice: PS/2 mouse device common for all mice
Telechips Touchscreen driver, (c) 2009 Telechips
tcc-ts got loaded successfully.
input: tcc-ts as /class/input/input0
TCC RTC, (c) 2009, Telechips
tcc-rtc tcc-rtc: rtc core: registered tcc-rtc as rtc0
Init SD core:0 slot:0 port:2
tcc-sdhc: init
Init SD core:1 slot:2 port:5
tcc-sdhc: init
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
TCC Board probe [tcc_board_probe]
WM8987 Audio Codec 0.12== alsa-debug == tcc_pcm_preallocate_dma_buffer size [655
36]
== alsa-debug == tcc_pcm_preallocate_dma_buffer size [65536]
asoc: WM8987 <-> tcc-i2s mapping ok
Set ID to host mode
Proc-FS interface for audio codec
ALSA device list:
#0: tccx_board (WM8987)
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
input: gpio-keys as /class/input/input1
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 NCard 1.86 GiB
mmcblk0: p1 p2
tcc-rtc tcc-rtc: setting system clock to 2009-10-02 01:01:17 UTC (1254445277)
Freeing init mmount: mounting none on /proc/bus/usb failed: No such file or dire
ctory
mmc1: new SDIO card at address 0001
umount: can't umount /mnt/mmcblk0: No smmc1: No SD detect pin
uch file or directory
udf: bad mount option "flush" or missing value
mount: mounting mmcblk0 on /mnt/mmcblk0 failed: Invalid argument
umount: can't umount /mnt/mmcblk0p1: No such file or directory
umount: can't umount /mnt/mmcblk0p2: No such file or directory
EXT3-fs: Unrecognized mount option "flush" or missing value
udf: bad mount option "flush" or missing value
mount: mounting mmcblk0p2 on /mnt/mmcblk0p2 failed: Invalid argument
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
arg[0] = /bin/upgrade
arg[1] = /mnt/mmcblk0p1/SmartQV7
arg[2] = /dev/ndda
firmware_file is SmartQV7
fbmemlen = 768000
open_screen success
open_font success
total sectors of nand is 3678208
hidden sectors of nand is 512
fw_fh->magic = 39000032
fw_fh->fh_size = 136
fw_fh->version = 2
fw_fh->date = 1271875648
fw_fh->vendor = hhtech
fw_fh->component_count = 4
(fw_fh->bootloader).file.offset = 136
(fw_fh->bootloader).file.size = 636664
(fw_fh->bootloader).nand.offset = 1
(fw_fh->bootloader).nand.size = 636664
(fw_fh->zimage).file.offset = 636800
(fw_fh->zimage).file.size = 5242880
(fw_fh->zimage).nand.offset = 1245
(fw_fh->zimage).nand.size = 5242880
(fw_fh->rootfs).file.offset = 5879680
(fw_fh->rootfs).file.size = 45419616
(fw_fh->rootfs).nand.offset = 0
(fw_fh->rootfs).nand.size = 45419616
(fw_fh->homefs).file.offset = 51299296
(fw_fh->homefs).file.size = 0
(fw_fh->homefs).nand.offset = 0
(fw_fh->homefs).nand.size = 0
total_size_sum = 51299160
mkfs.ext2: cannot stat /dev/ndda6: No such file or directory
mkfs.ext2 /dev/ndda6 -L android_root 1>/dev/null
mkfs.ext2: cannot stat /dev/ndda7: No such file or directory
mkfs.ext2 /dev/ndda7 -L android_data 1>/dev/null
mkfs.ext2: cannot stat /dev/ndda8: No such file or directory
mkfs.ext2 /dev/ndda8 -L android_cache 1>/dev/null
total_size = 136, nand_offset = 0, nHDPageAddr = 204800
remnant_size = 136
total_size = 636664, nand_offset = 1, nHDPageAddr = 204801
remnant_size = 22264
total_size = 5242880, nand_offset = 1245, nHDPageAddr = 206045
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
remnant_size = 20480
rm -rf /mnt/upgrade/
mkdir /mnt/upgrade/
mount: mounting /dev/ndda6 on /mnt/upgrade/ failed: No such file or directory
mount -t ext2 /dev/ndda6 /mnt/upgrade/
(fw_fh->rootfs).file.offset = 5879680
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1
Used Time:22.000000
umount: can't umount /mnt/upgrade: Invalid argument
umount /mnt/upgrade
echo 0 > /sys/devices/platform/hhtech_gpio/backlight_level
umount: can't umount /mnt/upgrade: Invalid argument
umount /mnt/upgrade
umount: can't umount /dev: Device or resource busy
swapoff: /etc/fstab: No such file or directory
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Restarting system.
I2C: init
LCD: - [LCDC1] lclk:1760000 pxclk:293333 (sourcell3)
CLOCK: PLL0:540, PLL1:660, PLL2:468, PLL3:528, CPU:540, BUS:330
DDI:264, GRP:6, IOB:156, VBUS:0, VPU:0, SMU:176
[NAND ] [BClk 156MHZ][1Tick 65][RE-S:0,P:5,H:2][WR-S:0,P:3,H:2][COM-S:2,P
:15,H:7]
[NAND ] [NB Area:4MB][DT Area:1796MB][HD Area0:120MB]
NAND:
dc on, don't need check battery!
FWDN: checking...
no key
Loading...
start bootloader
LCD: [NAND ] [BClk 156MHZ][1Tick 65][RE-S:0,P:5,H:2][WR-S:0,P:3,H:2][COM-
S:2,P:15,H:7]
[NAND ] [NB Area:4MB][DT Area:1796MB][HD Area0:120MB]


And after trying to boot:
LCD: [NAND ] [BClk 156MHZ][1Tick 65][RE-S:0,P:5,H:2][WR-S:0,P:3,H:2][COM-
S:2,P:15,H:7]
[NAND ] [NB Area:4MB][DT Area:1796MB][HD Area0:120MB]
start android
Loading...
hidden_offset_of_kernel = 32000
Tcboot_Size = 9B6F8
pageCount = 4DC, nand_offset = 32001
Load Ok! Jump to 0x40000000 (0xEA00001C)


=============================================
Boot Ver 0.2 for TCC9200 Linux
Board Ver TCC9200_WINCE_LINUX_DEMO_V0.1
DATE:Jan 29 2010, TIME:14:17:30
=============================================
LCD: 800x480 32Bpp

LCD: A070VM04
~ lcdc 0 clk:117 , lcdc 1 clk:668571 divide: 1 CH_addr:0xF02040E8 ~
CLOCK: PLL0:540, PLL1:660, PLL2:468, PLL3:528, CPU:540, BUS:330
NAND: [NAND ] [BClk 429496MHZ][1Tick 1][RE-S:0,P:15,H:15][WR-S:0,P:15,H:1
5][COM-S:15,P:15,H:15]
[NAND ] [NB Area:4MB][DT Area:1796MB][HD Area0:120MB]
NAND: V7
Kernel_Size = 500000, offset = 4DD
Linux version 2.6.29 (root@cc-desktop) (gcc version 4.3.1 (GCC) ) #132 Wed Feb 1
0 08:54:48 CST 2010
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Telechips TCC9200 Demo Board
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
Kernel command line: init=/init console=ttySAC0 mem=192M androidboot.hardware=tc
c92xx
Unknown boot option `androidboot.hardware=tcc92xx': ignoring
tcc9200_irq_init
PID hash table entries: 1024 (order: 10, 4096 bytes)
### CORE CLOCK (540000000 Hz), BUS CLOCK (330000000 Hz) ###
Console: colour dummy device 80x30
tcc_serial_set_termios port[0]
console [ttySAC0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
_etext:0xc05d4000, _text:0xc0209000, _end:0xc071231a, __init_end:0xc0209000, __i
nit_begin:0xc0100000
Memory: 192MB = 192MB total
Memory: 188288KB available (3884K code, 1272K data, 1060K init)
Calibrating delay loop... 539.03 BogoMIPS (lpj=2695168)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 932 bytes
NET: Registered protocol family 16
i2c_register_driver: new style driver
usb host enable
enable wifi
TCC clock driver initialized
clock: xin: unimplemented function 'clk_enable' called
attached TCC adc driver
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
msgmni has been set to 368
alg: No test for stdrng (krng)
io scheduler noop registered (default)
i2c /dev entries driver
i2c-gpio i2c-gpio.4: using pins 6 (SDA) and 5 (SCL)
i2c0 SCK(100) <-- input clk(40000Khz), prescale(7)
i2c1 SCK(100) <-- input clk(40000Khz), prescale(7)
tcc-i2c tcc-i2c: i2c-0: I2C adapter
tccfb_init
tccfb: TCC_Set_pLCDC nuw_mode:1 , before_mode:255
clock: pll2: unimplemented function 'clk_enable' called
tccfb: tcc_ddi_cache_setting mode: 3
tccfb_init LCDC:1
tccfb: +probe
tccfb: map_video_memory(fbi=cb8bce4c), map_size:00000000
tccfb: map_video_memory: clear ffa00000:002ee000
tccfb: map_video_memory: dma=4b000000 cpu=ffa00000 size=002ee000
tccfb: fb_show_logo
fb0: tccfb frame buffer device
TCC Overlay driver initializing
tcc_bl_init
tcc_intr: init (ver 2.0)
tcc_intr: init (ver 2.0)
[## BT ##] init_module
TCC rotation driver initializing
TCC scaler driver initializing
TCC scaler1 driver initializing
TCC83XX JPEG driver initializing
TCC T-DMB tuner driver initializing
tcc9200-uart.0: tcc-uart0 at MMIO 0xf0532000 (irq = 64) is a uart0
brd: module loaded
loop: module loaded
===========>ndd_init
[NAND ] [BClk 166MHZ][1Tick 61][RE-S:0,P:5,H:2][WR-S:0,P:3,H:2][COM-S:2,P
:15,H:7]
[NAND ] [NB Area:4MB][DT Area:1796MB][HD Area0:120MB]
ndda: ndda1 ndda2 ndda3 ndda4
[tcc_nand] init ndd(TCC8900, V7009)
pmem: 1 init
pmem_adsp: 0 init
Android kernel panic handler initialized (bind=kpanic)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
tcc-mmc0: init.
tcc-mmc1: init.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
tcc-ohci tcc-ohci: TCC OHCI
tcc-ohci tcc-ohci: new USB bus registered, assigned bus number 1
tcc-ohci tcc-ohci: irq 49, io mem 0xf0500000
===>ohci_tcc_start
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
tcc_udc_otg: set irq number 48
tcc-udc: init
android init
android_bind
mass_storage_function_add
<6><6><6><6>android_usb gadget: Number of LUNs=2
<6><6>adb_function_add
f_adb ep_in : c05f0e50
f_adb ep_out : c05f0e94
interface 0 = usb_mass_storage/cb3ca800
interface 1 = adb/cb3e96c0
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mice: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
Telechips Power Key Driver
input: telechips power key as /devices/virtual/input/input1
Telechips Touchscreen driver, (c) 2009 Telechips
tcc-ts got loaded successfully.
input: tcc-ts as /devices/platform/tcc-ts/input/input2
TCC RTC, (c) 2009, Telechips
tcc-rtc tcc-rtc: rtc core: registered tcc-rtc as rtc0
level=0

usb connected.
TCC Battery Driver Load
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
Registered led device: lcd-backlight
Registered led device: button-backlight
Registered led device: keyboard-backlight
==>speaker on
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI WM8987
No device for DAI tcc-i2s
mmc0: new SD card at address b368
TCC Board probe [tcc_board_probe]
WM8987 Audio Codec 0.12i2c_register_driver: new style driver
mmcblk0: mmc0:b368 NCard 1.86 GiB
mmcblk0:__attach_adapter: [Failure] id[0x0]class[0x0] id_table[wm8987]
__attach_adapter: [Failure] id[0x0]class[0x0] id_table[wm8987]
__attach_adapter: [Failure] id[0x0]class[0x0] id_table[wm8987]
__attach_adapter: [Failure] id[0x0]class[0x0] id_table[wm8987]
__attach_adapter: [Failure] id[0x0]class[0x0] id_table[wm8987]
p1 p2
asoc: WM8987 <-> tcc-i2s mapping ok
#0: tccx_board (WM8987)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3072 buckets, 12288 max)
ctnetlink v0.93: registering with nfnetlink.
android_usb gadget: high speed config #1: android
android_usb gadget: set_alt usb_mass_storage
android_usb gadget: set_alt adb
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
TCC cpufreq driver initialized
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
tcc-rtc tcc-rtc: setting system clock to 2009-10-02 01:03:40 UTC (1254445420)
Freeing init memory: 1060K
[#### BT ####] tcc_serial_³ºÜ֝ݺª,ûÍ¼¥Ýº«*;A¸+高¯¨ü[#### BT ####] tcc_serial_
stop_rx port[0]
[#### BT ####] tcc_serial_shutdown port[0]
hdmidrv: module license 'unspecified' taints kernel.
HDMI Driver ver. 1.2 (built Dec 23 2009 16:11:01)
CEC Driver ver. 1.0 (built Dec 23 2009 16:10:59)
audio_init
HDMI Audio Driver ver. 1.1 (built Dec 23 2009 16:11:00)
hpd_init
HPD Driver ver. 1.2.1 (built Jan 28 2010 10:38:20)
tcc_serial_set_termios port[0]tup port[0]
[#### BT ####] tcc_serial_stop_rx port[0]
[#### BT ####] tcc_serial_shutdown port[0]
init: cannot open '/initlogo.rle'
init: cannot find '/system/bin/sh', disabling 'console'
mmc1: new SDIO card at address 0001
init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
init: cannot find '/system/bin/vold', disabling 'vold'
init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
init: cannot find '/system/bin/app_process', disabling 'zygote'
init: cannot find '/system/bin/mediaserver', disabling 'media'
init: cannot find '/system/bin/playmp3', disabling 'bootsound'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/installd', disabling 'installd'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/keystore', disabling 'keystore'
init: cannot execve('/init.wifi.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
enabling adb
<7>SCSI CDB: 00 00 00 00 00 00
adb_open
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
init: cannot execve('/eth_up.sh'): No such file or directory
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
init: cannot execve('/eth_up.sh'): No such file or directory
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory
init: cannot execve('/eth_up.sh'): No such file or directory

CRAZY!

sws.
sws-vinpa is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Test tablette Android SmartQ T7 Coolmicro Autres liseuses 0 09-14-2010 07:11 PM
Any way to install Android on SmartQ V7? Renji Alternative Devices 4 07-23-2010 12:41 PM
Which SmartQ-device for Android Bemoo Alternative Devices 4 02-15-2010 06:50 PM
Android for Smart Q7 or SmartQ V7 jlgreg35 Alternative Devices 4 12-04-2009 03:44 AM
What about the Android OS for SmartQ? AlanMc Alternative Devices 1 10-27-2009 03:09 PM


All times are GMT -4. The time now is 06:04 AM.


MobileRead.com is a privately owned, operated and funded community.