MobileRead Forums
Register Guidelines E-Books Search Today's Posts Mark Forums Read

Go Back   MobileRead Forums > E-Book Software > Calibre
Reload this Page iRiver Story managed by Calibre

Welcome to the MobileRead Forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community today, you will have fewer ads, access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features.

If you have any problems with the registration process or your account login, please contact us.

Hint: Don't have time to visit us daily? Subscribe to our main RSS feed to receive our frontpage posts at your convenience.

Notices

Calibre Calibre is an open-source library manager to view, convert and catalog e-books. Cross-platform (Linux, Windows and OS X)

Reply
 
Thread Tools Search this Thread Display Modes
Old 12-13-2009, 05:35 PM   #1
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
Question iRiver Story managed by Calibre
Hi,

I just wonder if Calibre, as shown on demo movie, can send and browse ebooks stored on iRiver Story? As for now on my laptop Calibre does not recognize iRiver's device. Is there something that I have to do to so it will be recognized?

Best regards

Marek
mareksuski is offline   Reply With Quote
 
Enthusiast
Old 12-13-2009, 06:11 PM   #2
kovidgoyal
Creator of calibre, Ph.D.
kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!
 
kovidgoyal's Avatar
 
Posts: 12,367
Karma: 50287
Join Date: Oct 2006
Location: Albuquerque, NM
Device: PRS-500/505/600/700, K2, BeBook, ShineBook, Nook
http://calibre-ebook.com/user_manual...pported-in-app
__________________
Get calibre

Notice to all: I can not provide assistance with DRM removal, for legal reasons, so please do not contact me about it.
kovidgoyal is online now   Reply With Quote
Old 12-13-2009, 06:20 PM   #3
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
C:\Program Files\Calibre2>calibre-debug -d
USB devices on system:
[u'usb\\root_hub&vid8086&pid2830&rev0003',
u'usb\\root_hub&vid8086&pid2835&rev0003',
u'usb\\root_hub&vid8086&pid2832&rev0003',
u'usb\\root_hub&vid8086&pid2831&rev0003',
u'usb\\root_hub&vid8086&pid2834&rev0003',
u'usb\\root_hub20&vid8086&pid283a&rev0003',
u'usb\\root_hub20&vid8086&pid2836&rev0003',
u'usb\\vid_0403&pid_6001&rev_0200',
u'usb\\vid_046d&pid_c018&rev_4300',
u'usb\\vid_04b4&pid_6560&rev_000;',
u'usb\\vid_0603&pid_00f2&rev_0112',
u'usb\\vid_0603&pid_00f2&rev_0112&mi_00',
u'usb\\vid_0603&pid_00f2&rev_0112&mi_01',
u'usb\\vid_08ff&pid_2580&rev_0623',
u'usb\\vid_1006&pid_4023&rev_0323']
None
Drives detected:
(ID, Partitions, Drive letter)
('IDE\\DISKST980813AS_____________________________ _3.BHC___\\4E353048345
63443202020202020202020202020', 'No mount points found')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&0', 'No mount points found')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&1', 'No mount points found')
Looking for BEBOOK
Looking for BEBOOK_MINI
Looking for BLACKBERRY
Looking for CYBOOKG3
Looking for EB600
Looking for ILIAD
Looking for IREXDR1000
Looking for JETBOOK
Looking for KINDLE
Looking for KINDLE2
Looking for KINDLE_DX
Looking for NOOK
Looking for PRS505
Looking for PRS700
Looking for PRS500
Looking for ANDROID
Looking for CYBOOK_OPUS
Looking for COOL_ER
Looking for SHINEBOOK
Looking for ESLICK
Looking for NUUT2
Looking for IRIVER_STORY
Looking for POCKETBOOK360
Device possibly connected: Iriver Story Device Interface
Trying to open device... failed
Opening of the following devices failed
<calibre.devices.iriver.driver.IRIVER_STORY object at 0x029AE550>
Traceback (most recent call last):
File "site-packages\calibre\debug.py", line 104, in debug_device_driver
File "site-packages\calibre\devices\usbms\device.py", line 591, in open
File "site-packages\calibre\devices\usbms\device.py", line 309, in open_windows
DeviceError: Unable to detect the IRIVER_STORY disk drive. Try rebooting.


Press Enter to continue...
mareksuski is offline   Reply With Quote
Old 12-13-2009, 06:32 PM   #4
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
I have also rebooted my laptop and iRiver Story ebook. Still it does not work
mareksuski is offline   Reply With Quote
Old 12-13-2009, 07:00 PM   #5
user_none
Calibre dev
user_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with others
 
user_none's Avatar
 
Posts: 683
Karma: 2993
Join Date: Jan 2009
Location: Florida, USA
Device: Cybook Gen 3, PRS-505, EzReader PP
The device is being properly detected. However, Windows is not reporting what drive letter has been assigned to the device. There is nothing calibre can do to fix this. It's an issue with your install of Windows.
user_none is offline   Reply With Quote
Old 12-14-2009, 11:03 AM   #6
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
I am using TotalCommander and I see what letter device was assigned by Windows. I can also transfer files that way. I will try other machine (Windows 7).
mareksuski is offline   Reply With Quote
Old 12-18-2009, 06:47 PM   #7
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
Hi,
I have tried Calibre latest version (0.6.29) on Windows 7 with iRiver Story. Same result -> Calibre does not recognize the device:

Version: 0.6.29
USB devices on system:
[u'usb\\root_hub&vid1002&pid4388&rev0000',
u'usb\\root_hub&vid1002&pid4389&rev0000',
u'usb\\root_hub&vid1002&pid438b&rev0000',
u'usb\\root_hub&vid1002&pid438a&rev0000',
u'usb\\root_hub&vid1002&pid4387&rev0000',
u'usb\\root_hub20&vid1002&pid4386&rev0000',
u'usb\\vid_046d&pid_0b02&rev_4007',
u'usb\\vid_046d&pid_c709&rev_4007',
u'usb\\vid_046d&pid_c70a&rev_4007',
u'usb\\vid_046d&pid_c70e&rev_4007',
u'usb\\vid_058f&pid_6362&rev_0100',
u'usb\\vid_1006&pid_4023&rev_0323']
Drives detected:
(ID, Partitions, Drive letter)
('IDE\\DISKST3250620A_____________________________ _3.AAD___\\5&21C1DE1D&0&0.0.0', 'No mount points found')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&0', 6, u'L:\\')
Looking for BEBOOK
Looking for BEBOOK_MINI
Looking for BLACKBERRY
Looking for CYBOOKG3
Looking for ILIAD
Looking for IREXDR1000
Looking for JETBOOK
Looking for KINDLE
Looking for KINDLE2
Looking for KINDLE_DX
Looking for NOOK
Looking for PRS505
Looking for PRS700
Looking for PRS500
Looking for ANDROID
Looking for N770
Looking for N810
Looking for CYBOOK_OPUS
Looking for COOL_ER
Looking for ESLICK
Looking for NUUT2
Looking for IRIVER_STORY
Looking for POCKETBOOK360
Looking for GER2
Looking for ITALICA
Looking for SHINEBOOK
Looking for ECLICTO
Looking for EB600
Device possibly connected: Iriver Story Device Interface
Trying to open device... failed
Opening of the following devices failed
<calibre.devices.iriver.driver.IRIVER_STORY object at 0x032C6110>
Traceback (most recent call last):
File "site-packages\calibre\devices\__init__.py", line 93, in debug
File "site-packages\calibre\devices\usbms\device.py", line 591, in open
File "site-packages\calibre\devices\usbms\device.py", line 309, in open_windows
DeviceError: Unable to detect the IRIVER_STORY disk drive. Try rebooting.
mareksuski is offline   Reply With Quote
Old 12-18-2009, 07:07 PM   #8
user_none
Calibre dev
user_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with othersuser_none plays well with others
 
user_none's Avatar
 
Posts: 683
Karma: 2993
Join Date: Jan 2009
Location: Florida, USA
Device: Cybook Gen 3, PRS-505, EzReader PP
Quote:
Originally Posted by mareksuski View Post
Hi,
I have tried Calibre latest version (0.6.29) on Windows 7 with iRiver Story. Same result -> Calibre does not recognize the device ...
I've committed a change that should fix this issue.
user_none is offline   Reply With Quote
Old 12-29-2009, 01:51 PM   #9
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
Hi,

I have tested latest version 0.6.31 and it does not work. Below what I got when running Calibre in "Debug device detection":

Version: 0.6.31
USB devices on system:
[u'usb\\root_hub&vid8086&pid2830&rev0003',
u'usb\\root_hub&vid8086&pid2835&rev0003',
u'usb\\root_hub&vid8086&pid2832&rev0003',
u'usb\\root_hub&vid8086&pid2831&rev0003',
u'usb\\root_hub&vid8086&pid2834&rev0003',
u'usb\\root_hub20&vid8086&pid283a&rev0003',
u'usb\\root_hub20&vid8086&pid2836&rev0003',
u'usb\\vid_08ff&pid_2580&rev_0623',
u'usb\\vid_1006&pid_4023&rev_0323']
Drives detected:
(ID, Partitions, Drive letter)
('IDE\\DISKST980813AS_____________________________ _3.BHC___\\4E3530483456344320202020202020202020202 0', 0, u'C:\\')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&0', 1, u'G:\\')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&1', 'No mount points found')
Looking for HANLINV3
Looking for HANLINV5
Looking for BLACKBERRY
Looking for CYBOOKG3
Looking for ILIAD
Looking for IREXDR1000
Looking for JETBOOK
Looking for KINDLE
Looking for KINDLE2
Looking for KINDLE_DX
Looking for NOOK
Looking for PRS505
Looking for PRS700
Looking for PRS500
Looking for ANDROID
Looking for N770
Looking for N810
Looking for CYBOOK_OPUS
Looking for COOL_ER
Looking for ESLICK
Looking for NUUT2
Looking for IRIVER_STORY
u'usb\\vid_1006&pid_4023&rev_0323'
Looking for POCKETBOOK360
Looking for GER2
Looking for ITALICA
Looking for SHINEBOOK
Looking for ECLICTO
Looking for BOOX
Looking for EB600
Device possibly connected: Iriver Story Device Interface
Trying to open device... Unable to open device <calibre.devices.iriver.driver.IRIVER_STORY object at 0x02C58810>
Traceback (most recent call last):
File "site-packages\calibre\gui2\device.py", line 100, in do_connect
File "site-packages\calibre\devices\usbms\device.py", line 694, in open
File "site-packages\calibre\devices\usbms\device.py", line 337, in open_windows
DeviceError: Unable to detect the IRIVER_STORY disk drive. Try rebooting.
Connect to device failed, retying in 5 seconds...
failed
Opening of the following devices failed
<calibre.devices.iriver.driver.IRIVER_STORY object at 0x02C58810>
Traceback (most recent call last):
File "site-packages\calibre\devices\__init__.py", line 97, in debug
File "site-packages\calibre\devices\usbms\device.py", line 694, in open
File "site-packages\calibre\devices\usbms\device.py", line 337, in open_windows
DeviceError: Unable to detect the IRIVER_STORY disk drive. Try rebooting.

I hope that you will be able to find solution.

Best regards

Marek
mareksuski is offline   Reply With Quote
Old 12-30-2009, 03:13 PM   #10
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
"Debug device detection" logs from another Windows XP SP3 machine:

Version: 0.6.31
USB devices on system:
[u'usb\\root_hub&vid10de&pid03f1&rev00a3',
u'usb\\root_hub20&vid10de&pid03f2&rev00a3',
u'usb\\vid_046d&pid_c01d&rev_2100',
u'usb\\vid_1006&pid_4023&rev_0323']
Drives detected:
(ID, Partitions, Drive letter)
('IDE\\DISKST3120026A_____________________________ _3.06____\\4A3531544D39424D20202020202020202020202 0', 0, u'C:\\')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&0', 1, u'F:\\')
('USBSTOR\\DISK&VEN_IRIVER&PROD_STORY&REV_0323\\37 2041756775&1', 'No mount points found')
Looking for HANLINV3
Looking for HANLINV5
Looking for BLACKBERRY
Looking for CYBOOKG3
Looking for ILIAD
Looking for IREXDR1000
Looking for JETBOOK
Looking for KINDLE
Looking for KINDLE2
Looking for KINDLE_DX
Looking for NOOK
Looking for PRS505
Looking for PRS700
Looking for PRS500
Looking for ANDROID
Looking for N770
Looking for N810
Looking for CYBOOK_OPUS
Looking for COOL_ER
Looking for ESLICK
Looking for NUUT2
Looking for IRIVER_STORY
u'usb\\vid_1006&pid_4023&rev_0323'
Looking for POCKETBOOK360
Looking for GER2
Looking for ITALICA
Looking for SHINEBOOK
Looking for ECLICTO
Looking for BOOX
Looking for EB600
Device possibly connected: Iriver Story Device Interface
Trying to open device... Unable to open device <calibre.devices.iriver.driver.IRIVER_STORY object at 0x0283DCF0>
Traceback (most recent call last):
File "site-packages\calibre\gui2\device.py", line 100, in do_connect
File "site-packages\calibre\devices\usbms\device.py", line 694, in open
File "site-packages\calibre\devices\usbms\device.py", line 337, in open_windows
DeviceError: Wykrycie dysku IRIVER_STORY niemożliwe. Spróbuj ponownie uruchomić komputer.
Connect to device failed, retying in 5 seconds...
failed
Opening of the following devices failed
<calibre.devices.iriver.driver.IRIVER_STORY object at 0x0283DCF0>
Traceback (most recent call last):
File "site-packages\calibre\devices\__init__.py", line 97, in debug
File "site-packages\calibre\devices\usbms\device.py", line 694, in open
File "site-packages\calibre\devices\usbms\device.py", line 337, in open_windows
DeviceError: Wykrycie dysku IRIVER_STORY niemożliwe. Spróbuj ponownie uruchomić komputer.

I hope it will help

Marek
mareksuski is offline   Reply With Quote
Old 01-04-2010, 05:30 PM   #11
n0rd
Member
n0rd began at the beginning.
 
n0rd's Avatar
 
Posts: 10
Karma: 10
Join Date: Jan 2010
Device: iriver Story
i've a solution for the: "Unable to detect the IRIVER_STORY disk drive." problem

simply put a SD memory inside the extra expansion slot, i've put a 16MB one that i don't use, and the probem was solved
and boom... problem resolved
n0rd is offline   Reply With Quote
Old 01-05-2010, 02:45 PM   #12
mareksuski
Member
mareksuski began at the beginning.
 
Posts: 15
Karma: 10
Join Date: Dec 2009
Device: iRiver Store
This problem was finally resolved in version 0.6.32.

Thanks !!
mareksuski is offline   Reply With Quote
Old 02-18-2010, 01:30 PM   #13
rwst
Junior Member
rwst began at the beginning.
 
rwst's Avatar
 
Posts: 5
Karma: 10
Join Date: Mar 2007
Device: Iriver Story
Hello, my problems on the Mac (Snow Leo 10.6.2) with the Iriver Story are daunting. It's as if the device isn't there. Can you help?

calibre-debug -d
Version: 0.6.40
USB devices on system:
[['0x5acL',
'0x8005L',
'0x200L',
u'Apple Inc.',
u'OHCI Root Hub Simulation',
u''],
['0xa81L', '0x205L', '0x10L', u'CHESEN', u'PS2 to USB Converter', u''],
['0x5acL', '0x8242L', '0x16L', u'Apple Computer, Inc.', u'IR Receiver', u''],
['0x5acL',
'0x8006L',
'0x200L',
u'Apple Inc.',
u'EHCI Root Hub Simulation',
u''],
['0x5acL',
'0x8005L',
'0x200L',
u'Apple Inc.',
u'OHCI Root Hub Simulation',
u''],
['0xa5cL', '0x4500L', '0x100L', u'Apple Inc.', u'BRCM2046 Hub', u''],
['0x5acL',
'0x8216L',
'0x180L',
u'Apple Inc.',
u'Bluetooth USB Host Controller',
u'002436F0C9D2'],
['0x5acL',
'0x8006L',
'0x200L',
u'Apple Inc.',
u'EHCI Root Hub Simulation',
u''],
['0x5e3L', '0x608L', '0x702L', u'', u'USB2.0 Hub', u''],
['0x5e3L', '0x608L', '0x702L', u'', u'USB2.0 Hub', u''],
['0x4a9L', '0x1905L', '0x603L', u'Canon', u'CanoScan', u''],
['0x152dL',
'0x2339L',
'0x100L',
u'JMicron',
u'USB to ATA/ATAPI Bridge',
u'4047C21FFFFF']]
Looking for HANLINV3
Looking for HANLINV5
Looking for BLACKBERRY
Looking for CYBOOK
Looking for ILIAD
Looking for IREXDR1000
Looking for IREXDR800
Looking for JETBOOK
Looking for SHINEBOOK
Looking for POCKETBOOK360
Looking for KINDLE
Looking for KINDLE2
Looking for KINDLE_DX
Looking for NOOK
Looking for PRS505
Looking for PRS700
Looking for PRS500
Looking for ANDROID
Looking for N770
Looking for N810
Looking for COOL_ER
Looking for ESLICK
Looking for NUUT2
Looking for IRIVER_STORY
Looking for GER2
Looking for ITALICA
Looking for ECLICTO
Looking for DBOOK
Looking for INVESBOOK
Looking for BOOX
Looking for BOOQ
Looking for EB600
Looking for README
Looking for N516
Devices possibly connected: None

Dont forget to send the contents of /tmp/ioreg.txt
You can open it with the command: open /tmp/ioreg.txt

That file is too long so I refrain from posting it here.

Update: I thought I would take it off the line and compare the output: no difference!
Last edited by rwst; 02-18-2010 at 01:44 PM.
rwst is offline   Reply With Quote
Old 02-18-2010, 06:07 PM   #14
kovidgoyal
Creator of calibre, Ph.D.
kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!kovidgoyal is faster than a rolling 'o,' stronger than silent 'e,' and leaps capital 'T' in a single bound!
 
kovidgoyal's Avatar
 
Posts: 12,367
Karma: 50287
Join Date: Oct 2006
Location: Albuquerque, NM
Device: PRS-500/505/600/700, K2, BeBook, ShineBook, Nook
Your device is not being detected by the computer at all. Try a different usb port/usb cable/computer
__________________
Get calibre

Notice to all: I can not provide assistance with DRM removal, for legal reasons, so please do not contact me about it.
kovidgoyal is online now   Reply With Quote
Old 02-19-2010, 02:45 AM   #15
rwst
Junior Member
rwst began at the beginning.
 
rwst's Avatar
 
Posts: 5
Karma: 10
Join Date: Mar 2007
Device: Iriver Story
Thx, the embarrassing fact was that the device was in blocked state and I, being used to the Iliad, thought that a connection is possible without chosing a menu item.
rwst is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Iriver Story Valio iRiver Story 142 07-26-2010 02:14 PM
iRiver Story: new subforum cybbe iRiver Story 12 03-15-2010 11:37 AM
ePub doc created with Calibre is not showing polish characters in iRiver Story mareksuski Calibre 10 03-11-2010 07:39 AM
iriver story or ? scribblenauts Which one should I buy? 1 01-05-2010 08:28 AM
iriver Story coming to Germany? Nate the great News 5 09-07-2009 02:42 PM


All times are GMT -4. The time now is 06:31 PM.

Contact Us - FAQ - Guidelines - Privacy - Archive - Top

MobileRead.com is a privately owned, operated and funded community.