|12-14-2009, 12:28 AM||#1|
Join Date: Dec 2009
Device: Rocket eBook Reader
Original REB charger question
I am trying to resurrect my reader, which is an original Rocket eBook Reader by nuvomedia.
I have to make my own charger from bits i have, but can anyone confirm the voltage and amps I should be using, please?
I know the REB 1100 uses 12V at 1000 mA, but would mine be the same as this?
Thanks for any info you can give.
|12-15-2009, 02:20 PM||#2|
Join Date: Jun 2007
Device: Many ebook readers at my house
You want the equivalent of the Radio Shack 273-358 (old number, 273-1775) 12VDC 1500ma adapter with Adaptaplug A 273-334. Make sure you plug the tip in so the the tip is positive. I mark it with a sharpie so I can see at a glance if it's right. The adapter will set you back $25 or so and the tip is free with purchase.
If you have enough bits and pieces laying around, or are overseas since this one is 120VAC input, you want a regulated 12 volts, at least 1000ma and a O.D. 2.35mm by I.D. 0.7mm center positive tip.
This combo works on Original Rockets, 1100's and 1150's.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Ended B&N Nook with "Frame", Light, Charger, and Original Packaging||RPribyl||Flea Market||11||09-21-2010 09:27 PM|
|Newbie charger question||Ruggles||iRex||1||09-01-2009 09:51 AM|
|Charger question and Lightwedge||kelly1010||Sony Reader||4||04-09-2009 06:11 PM|
|question re. reader a.c. charger||br772||Workshop||7||03-24-2009 08:53 PM|
|Question re AC Charger||Telcoman||Sony Reader||3||02-19-2009 06:43 PM|