|09-04-2013, 10:40 PM||#1|
Join Date: Jun 2010
Device: Onyx Boox i62 Firefly
Onyx Boox i62 HD Firefly - can't connect to computer
I received my Firefly yesterday and charged it for the requisite number of hours. When I first went to connect it to my computer, it connected OK, but I didn't realize the default setting had it turn itself off after so many minutes, so the transfer of e-books I tried to do did not work. It created all the files on the internal storage, but they were all 0 bytes. I came back to it to find it had shut down, and tried copying the folder once more. The second time, I realized the power setting needed to be changed, so I switched it to "never" and tried again. Unfortunately, now I cannot get it to connect to the computer at all. It sees the computer and asks me if I want to connect it, I press "Yes", and nothing ever happens on my computer. I am running Linux Mint 13 Mate, in case that helps.
Does anyone have any idea how to make my e-reader connect to the computer again? I haven't bought a microSD card yet because I'm still trying to make sure which kind I can buy (microSD only, or microSDHC, or what? I'd like to get the maximum capacity the e-reader will handle), so this is the only way I'll be able to read anything on it until I get it sorted out--I have a vast library on my computer that I'd like to be able to read elsewhere! Any help or advice will be welcomed.
For some reason, that port just quit working with the e-reader. Switching to another port seems to have done the trick. If anyone does read this, though, what microSD card would you recommend and where to get it? The max capacity possible is what I'd like.
Last edited by Doranwen; 09-04-2013 at 11:19 PM. Reason: Switching ports was the obvious solution (can't believe I forgot that!)
|09-06-2013, 07:58 AM||#2|
Join Date: Oct 2008
Device: Samsung EB60, Onyx M92
Under Debian, I plug my M92, on the M92's screen I select "Yes". After a while, the internal drive "Boox" and my SD card are mounted.
Check the operations with "dmseg" and "/var/log/messages".
May be, the device is detected, but the partitions are not automounted.
|09-07-2013, 01:08 AM||#3|
Join Date: Jun 2010
Device: Onyx Boox i62 Firefly
Edit: Now that I got it to reset, I tried again. Unfortunately, dmesg doesn't seem to give me anything about the USB ports. Plugging it in again, the Firefly sees the computer. The computer ignores the Firefly. The last bunch of lines from dmesg are below, but they're not illuminating to me at all.
[ 6.540824] usb 3-3: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 6.541674] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2811
[ 6.541698] usbcore: registered new interface driver usblp
[ 6.631359] 3:3:1: cannot get freq at ep 0x84
[ 6.632786] usbcore: registered new interface driver snd-usb-audio
[ 7.408730] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=1
[ 7.408875] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 7.408916] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 7.408963] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 7.409012] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.409090] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.409189] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.409289] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.409357] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.409421] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.409484] input: HDA Intel PCH Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.409547] input: HDA Intel PCH Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 7.409608] input: HDA Intel PCH Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 7.409673] input: HDA Intel PCH Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 8.575737] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 8.866891] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.008598] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.008601] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 9.009256] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.054864] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 10.087956] xhci_hcd 0000:06:00.0: WARN Event TRB for slot 2 ep 0 with no TDs queued?
[ 10.419190] ppdev: user-space parallel port driver
[ 10.454605] Bluetooth: Core ver 2.16
[ 10.454614] NET: Registered protocol family 31
[ 10.454615] Bluetooth: HCI device and connection manager initialized
[ 10.454616] Bluetooth: HCI socket layer initialized
[ 10.454617] Bluetooth: L2CAP socket layer initialized
[ 10.454622] Bluetooth: SCO socket layer initialized
[ 10.734046] Bluetooth: RFCOMM TTY layer initialized
[ 10.734049] Bluetooth: RFCOMM socket layer initialized
[ 10.734050] Bluetooth: RFCOMM ver 1.11
[ 10.903058] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.903060] Bluetooth: BNEP filters: protocol multicast
[ 11.046737] init: failsafe main process (1124) killed by TERM signal
Last edited by Doranwen; 09-07-2013 at 01:21 AM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Onyx Boox I62 HD Firefly Bricked||Rutger||Onyx Boox||6||05-13-2013 05:44 PM|
|Onyx boox i62 or Onyx boox 92M for PDF reading?||tidyboyd||Which one should I buy?||16||04-02-2013 04:19 PM|
|Boox i62 Firefly: Is it possible to disable the wireless?||Iskariot||Onyx Boox||2||03-28-2013 02:13 AM|
|US Vendors for Boox i62 Firefly?||MorningSong||Onyx Boox||1||01-27-2013 01:34 AM|
|New onyx boox i62.||ersott||News||2||10-14-2011 02:31 PM|