Kindle Web Remote Control

[chigozie]

Hi,
I've coded a simple remote control for my Kindle 4 NT, but it should work with any kindle which has physical buttons. It is accessed in a browser on my phone.

Instructions are here: http://www.instructables.com/id/Kind...emote-Control/

I hope it's useful!

[twobob]

tiny point. anything on /mnt/us is executable already

Make serverstart.sh executable (chmod u+x serverstart.sh)

not required.

cool project.

EDIT: you could put together a busybox that provides inetd without too much pain. perhaps even the one for the 3 I built already has that in... you could Frankenstein that in perhaps.
There are some notes on making a busybox the buildroot way kicking about.

[drauger]

Cool. But there is one little problem. If you have automatic DHCP, you have to find your kindle's ip every time you connect it ti wifi. So, it would be much better to add to your serverstart.sh something like this:

killall -stop cvm 2>/dev/null
eips -c
IP=`lipc-get-prop com.lab126.wifid 711 | grep IP | sed -e 's/.*: *//'`
eips 14 7 $IP
eips 10 20 "Press DOWN to exit"
waitforkey 108
eips ''
killall -cont cvm 2>/dev/null

And you definitely don't need usbnet hack to have httpd and ssh over wifi.

[chigozie]

Originally Posted by drauger

Cool. But there is one little problem. If you have automatic DHCP, you have to find your kindle's ip every time you connect it ti wifi. So, it would be much better to add to your serverstart.sh something like this:

killall -stop cvm 2>/dev/null
eips -c
IP=`lipc-get-prop com.lab126.wifid 711 | grep IP | sed -e 's/.*: *//'`
eips 14 7 $IP
eips 10 20 "Press DOWN to exit"
waitforkey 108
eips ''
killall -cont cvm 2>/dev/null

Good idea, although not useful for me personally because
1) my ip address is static, at least until I get my university wifi access working
2) I can't get kite working, and launchpad doesn't work on the K4NT, so I have to ssh in to be able to start the script, which requires knowing the ip in the first place.
I'll add it to the instructable though, as it would probably be generally useful.

Originally Posted by drauger

And you definitely don't need usbnet hack to have httpd and ssh over wifi.

Really? How do you do it otherwise?
I could build a busybox which includes httpd and inetd as described by twobob above, and that would give me httpd, but how would I ssh in without usbnetwork?

Originally Posted by twobob

anything on /mnt/us is executable already

Thanks, removed.

[drauger]

Originally Posted by chigozie

I could build a busybox which includes httpd and inetd as described by twobob above, and that would give me httpd, but how would I ssh in without usbnetwork?

I use ssh over wifi without usbnetwork hack. Can't find proper link, sorry.

[twobob]

Originally Posted by drauger

I use ssh over wifi without usbnetwork hack. Can't find proper link, sorry.

I do too... (on the touch....)

In essence, start the dropbear process (or w/e is going to power this party), punch a hole in IPtables port 22, point one thing at the other. I didn't have usnbet on my touch for ages also, so I can confirm this works "on there".

Usbnetworking provisions this via USB in addition to wifi. You only require the wifi side though for what you discuss.

Niluje would give you the most comprehensive answer of the complete technical differences between simply provisioning remotely accessible ssh services on the device and his implementions' offerings.

But yup. doable. on a 4 OOTB? I dont know.

[NiLuJe]

Err, there's no dropbear/sshd binary on the default FW (the exception being some early K4, in diags only, or if by miracle your device bypassed parts of the shipping/release process and was never reset to factory defaults).

[twobob]

Originally Posted by NiLuJe

Err, there's no dropbear/sshd binary on the default FW (the exception being some early K4, in diags only, or if by miracle your device bypassed parts of the shipping/release process and was never reset to factory defaults).

What he said.

So shove something on there to power it yourself or use the provided bundle

[knc1]

Originally Posted by chigozie

2) I can't get kite working, and launchpad doesn't work on the K4NT, so I have to ssh in to be able to start the script, which requires knowing the ip in the first place.

So install and use the new launcher.

This is the 21st century - You gotta keep up with the new technologies or your instructable will be out of date before you finish typing it.

[drauger]

Originally Posted by NiLuJe

Err, there's no dropbear/sshd binary on the default FW

Right. But you can use dropbear/openssh from optware (as I do) or just build it together with httpd.

Originally Posted by chigozie

I can't get kite working, and launchpad doesn't work on the K4NT

Kite works on K4NT, but very strange sometimes. I use sightly adapted CR3Runner.

[NiLuJe]

@drauger: True, but I was mostly commenting on the default FW vs. USBNetwork, since that was kinda the point of USBNetwork: to ship a dropbear or OpenSSH binary targeted at the device .