New kindle 4 (FW 4.1.0): cannot SSH to device, connection refused, why?

Jackie7 · 01-19-2013, 11:22 AM

Hi,

I am trying to connect to my brand new kindle 4 (Fw 4.1.0) using SSH on both WIndows and Linux, but SSH keeps giving me a "connection refused" errror message.

My host is set to 192.168.15.1, my kindle is in USB networking mode on 192.168.15.244, and I can easily ping that device. But SSH keeps telling me it cannot connect.

Why? What am I missing?

ixtab · 01-19-2013, 11:46 AM

If you have set usbnetwork to "auto", then the Kindle should be detached from the computer during startup, otherwise something just breaks. So unplug and reboot, maybe that helps.

Jackie7 · 01-19-2013, 12:04 PM

Thanks ixtab, but that's not the problem, since I tried on Linux and Windows as I wrote, and I really tried several times.

I can ping the device, but not SSH to it

Is there anything new in Fw 4.1.0 preventing SSH? Do I need to set a specific IP address other than 192.168.15.1 to my host computer?

twobob · 01-19-2013, 12:15 PM

The IP is for the USB adaptors IP. not the computers IP. This has been covered lots of times. You would be better served if this entire thing was in the right thread.

I recall answering this same problem several times there already, doubtless others have to. Check out Nilujes thread, and the Readme. specifically note the section about what the IP refer to.

dsmid · 01-19-2013, 12:42 PM

Quote:

Originally Posted by Jackie7

my kindle is in USB networking mode on 192.168.15.244

If you are referring to diags mode, then the cause is that the sshd binaries were removed from the diags partition by Amazon in 4.1.
You need to reflash the diags partition with an image that is not crippled like this.

Jackie7 · 01-20-2013, 05:56 AM

Quote:

Originally Posted by dsmid

If you are referring to diags mode, then the cause is that the sshd binaries were removed from the diags partition by Amazon in 4.1.
You need to reflash the diags partition with an image that is not crippled like this.

Thanks a lot for this answer, I wonder why this fact is not covered in any of the tutorials, at least none I have found so far. Where can I get an uncrippled image, and can it be flashed without jailbreaking the device?

@twobob: sorry, but I think you totally misunderstood me, I read those posts you refer to, but I am quite sure that I got the IP address stuff right. When I talk about my "host computer", of course I refer to the virtual USB card on my Windows system connected to the kindle. The kindle's IP is fixed, as shown in the diag screen on the kindle, but I was wondering if the host needed to have a specific IP address (for the kindle to accept ssh connections from).

knc1 · 01-20-2013, 08:59 AM

Quote:

Originally Posted by Jackie7

I was wondering if the host needed to have a specific IP address (for the kindle to accept ssh connections from).

Answer: No
The iptables entry does an "accept from any to destination port 22".

Quote:

Where can I get an uncrippled image?

Top of forum - de-bricking thread

NiLuJe · 01-20-2013, 11:03 AM

@Jackie7: It *is* documented somewhere: the K4 Wiki

.

dsmid · 01-20-2013, 11:33 AM

@Jackie: You can find it here: http://pastebin.com/Wdw4L7yT , look for mmcblk0p2-4.0.0 image and for diags_kernel-4.0.0 image.
See http://wiki.mobileread.com/wiki/K4_Index#De-Bricking for how to reflash the partition & kernel.
You can achieve the same thing and more from within the main mode by jailbreaking and installing the USBNetwork hack. Much easier for a non-geek than reflashing IMHO.

01-19-2013, 11:22 AM	#1
Jackie7 Enthusiast Posts: 31 Karma: 10 Join Date: Jul 2011 Device: Kindle 3	New kindle 4 (FW 4.1.0): cannot SSH to device, connection refused, why? Hi, I am trying to connect to my brand new kindle 4 (Fw 4.1.0) using SSH on both WIndows and Linux, but SSH keeps giving me a "connection refused" errror message. My host is set to 192.168.15.1, my kindle is in USB networking mode on 192.168.15.244, and I can easily ping that device. But SSH keeps telling me it cannot connect. Why? What am I missing?

01-19-2013, 12:15 PM	#4
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 5,143 Karma: 5328985 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\|K4\|K3-3G\|DXG\|Ematic E6+E8\|Rooted Nook Touch\|NO K2!!	The IP is for the USB adaptors IP. not the computers IP. This has been covered lots of times. You would be better served if this entire thing was in the right thread. I recall answering this same problem several times there already, doubtless others have to. Check out Nilujes thread, and the Readme. specifically note the section about what the IP refer to. __________________ Audiophile and electron bully. My tunes (for free) soundcloud.com/twobob. DONATE TO KUAL BY CLICKING THIS SIMPLE LINK Kung-Fu. Hard work over time to accomplish skill. A painter can have kung-fu... The musician can have kung-fu, or the poet who paints pictures with words and makes emperors weep. This, too, is kung-fu. Formless, nameless, the true master dwells within. Only you can free him. The album I'm headlining on at the moment: s.beatport.com/OCp9dT - FREE: 2012 Award winning set

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KPW Win8 x64 PuTTy network error: connection refused	Bagerfahrer	Kindle Developer's Corner	2	01-19-2013 12:18 PM
3.1 usbNetwork: Connection Refused	ahonamous	Kindle Developer's Corner	5	05-21-2011 02:24 AM
7.56: error on device connection	jesscat	Calibre	13	04-17-2011 06:19 PM
Device connection	Bsibbo	Calibre	2	10-23-2010 08:46 AM
Looking for small wireless device w/SSH	xarses	Which one should I buy?	5	02-16-2010 12:01 PM

01-19-2013, 11:46 AM	#2
ixtab Mayan Goddess Posts: 2,295 Karma: 4929663 Join Date: Dec 2011 Device: K3/K4/K5/PW	If you have set usbnetwork to "auto", then the Kindle should be detached from the computer during startup, otherwise something just breaks. So unplug and reboot, maybe that helps.

01-19-2013, 12:04 PM	#3
Jackie7 Enthusiast Posts: 31 Karma: 10 Join Date: Jul 2011 Device: Kindle 3	Thanks ixtab, but that's not the problem, since I tried on Linux and Windows as I wrote, and I really tried several times. I can ping the device, but not SSH to it Is there anything new in Fw 4.1.0 preventing SSH? Do I need to set a specific IP address other than 192.168.15.1 to my host computer?

01-20-2013, 11:03 AM	#8
NiLuJe BLAM! Posts: 2,895 Karma: 2267781 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w & PW	@Jackie7: It is documented somewhere: the K4 Wiki .

01-20-2013, 11:33 AM	#9
dsmid Linux devotee Posts: 315 Karma: 1668592 Join Date: Feb 2011 Device: Kindle 3, Kindle 4B	@Jackie: You can find it here: http://pastebin.com/Wdw4L7yT , look for mmcblk0p2-4.0.0 image and for diags_kernel-4.0.0 image. See http://wiki.mobileread.com/wiki/K4_Index#De-Bricking for how to reflash the partition & kernel. You can achieve the same thing and more from within the main mode by jailbreaking and installing the USBNetwork hack. Much easier for a non-geek than reflashing IMHO.


Advertisement Enthusiast