Register Guidelines E-Books Search Today's Posts Mark Forums Read

Go Back   MobileRead Forums > E-Book Readers > More E-Book Readers > Bookeen

Notices

Reply
 
Thread Tools Search this Thread
Old 01-15-2008, 03:42 PM   #1
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
Cybook not found in linux, found in win XP

AS the title says, the cybook is recogniced bboting the computer in XP, but it does not show at all in linux (ubuntu 7.10). No disks are found when I connect, as if it does not exist. Any ideas?. It seems well connected to one port of the motherboard in the back.
fjf is offline   Reply With Quote
Old 01-15-2008, 04:39 PM   #2
tompe
Grand Sorcerer
tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.
 
Posts: 7,053
Karma: 3993884
Join Date: Oct 2007
Location: Link÷png, Sweden
Device: Nexus 7, Nexus 5, iPad 2, Kindle PW
Check with dmesg if you get the device. If you do not get the device make sure that the correct USB modules are loaded.
tompe is offline   Reply With Quote
 
Enthusiast
Old 01-15-2008, 05:12 PM   #3
diabloNL
Gadget Force«
diabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with othersdiabloNL plays well with others
 
diabloNL's Avatar
 
Posts: 705
Karma: 2733
Join Date: Jun 2006
Location: The Netherlands
Device: Sony PRS-300 + Cybook with funny screen :P
I tried it last week with the live CD of 7.10 and it worked fine.
diabloNL is offline   Reply With Quote
Old 01-15-2008, 06:26 PM   #4
Pickle
Enthusiast
Pickle began at the beginning.
 
Posts: 26
Karma: 10
Join Date: Dec 2006
Location: Boston, MA
Device: Cybook Gen3
Quote:
Originally Posted by fjf View Post
AS the title says, the cybook is recogniced bboting the computer in XP, but it does not show at all in linux (ubuntu 7.10). No disks are found when I connect, as if it does not exist. Any ideas?. It seems well connected to one port of the motherboard in the back.

I've been using it exclusively with Ubuntu 7.10 without problems (with and without an SD card). Can you give any more information so we can help you troubleshoot?
Pickle is offline   Reply With Quote
Old 01-16-2008, 02:37 AM   #5
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
dmesg:

[ 19.662413] ACPI: bus type pci registered
[ 19.686087] PCI: PCI BIOS revision 3.00 entry at 0xfa140, last bus=2
[ 19.686088] PCI: Using configuration type 1
[ 19.686089] Setting up standard PCI resources
[ 19.688006] ACPI: EC: Look up EC in DSDT
[ 19.690809] ACPI: Interpreter enabled
[ 19.690810] ACPI: (supports S0 S3 S4 S5)
[ 19.690818] ACPI: Using IOAPIC for interrupt routing
[ 19.693905] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.694695] PCI: Transparent bridge - 0000:00:1e.0
[ 19.694717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.694807] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 19.702938] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 9 10 11 12)
[ 19.703006] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 10 11 12) *0, disabled.
[ 19.703072] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 10 *11 12)
[ 19.703138] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12)
[ 19.703204] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12) *0, disabled.
[ 19.703270] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 *7 9 10 11 12)
[ 19.703336] ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 7 9 *10 11 12)
[ 19.703402] ACPI: PCI Interrupt Link [LNK1] (IRQs *4 5 7 9 10 11 12)
[ 19.703472] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.703488] pnp: PnP ACPI init
[ 19.703492] ACPI: bus type pnp registered
[ 19.705011] pnp: PnP ACPI: found 14 devices
[ 19.705012] ACPI: ACPI bus type pnp unregistered
[ 19.705014] PnPBIOS: Disabled by ACPI PNP
[ 19.705122] PCI: Using ACPI for IRQ routing
[ 19.705124] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.733901] NET: Registered protocol family 8
[ 19.733902] NET: Registered protocol family 20
[ 19.737821] Time: tsc clocksource has been installed.
[ 19.761928] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 19.761930] system 00:01: ioport range 0x880-0x88f has been reserved
[ 19.761937] system 00:09: ioport range 0x400-0x4bf has been reserved
[ 19.761942] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 19.761947] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[ 19.761949] system 00:0d: iomem range 0x7ff00000-0x7fffffff has been reserved
[ 19.761951] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 19.761953] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 19.761955] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved
[ 19.761958] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 19.761960] system 00:0d: iomem range 0xfed14000-0xfed1dfff could not be reserved
[ 19.761962] system 00:0d: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 19.761964] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 19.761966] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 19.761968] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[ 19.761970] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 19.792217] PCI: Bridge: 0000:00:01.0
[ 19.792218] IO window: d000-dfff
[ 19.792220] MEM window: fa000000-fcffffff
[ 19.792222] PREFETCH window: d0000000-dfffffff
[ 19.792224] PCI: Bridge: 0000:00:1e.0
[ 19.792226] IO window: c000-cfff
[ 19.792229] MEM window: fdd00000-fddfffff
[ 19.792231] PREFETCH window: fde00000-fdefffff
[ 19.792239] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.792242] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.792248] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.792254] NET: Registered protocol family 2
[ 19.834069] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.834221] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 19.834472] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.834579] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.834580] TCP reno registered
[ 19.846155] checking if image is initramfs... it is
[ 20.216297] Freeing initrd memory: 7281k freed
[ 20.216706] audit: initializing netlink socket (disabled)
[ 20.216714] audit(1200442764.976:1): initialized
[ 20.216837] highmem bounce pool size: 64 pages
[ 20.217873] VFS: Disk quotas dquot_6.5.1
[ 20.217912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.217996] AppArmor: Unable to register AppArmor
[ 20.218038] io scheduler noop registered
[ 20.218039] io scheduler anticipatory registered
[ 20.218040] io scheduler deadline registered
[ 20.218046] io scheduler cfq registered (default)
[ 20.218140] Boot video device is 0000:01:00.0
[ 20.218193] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.218213] assign_interrupt_mode Found MSI capability
[ 20.218230] Allocate Port Service[0000:00:01.0cie00]
[ 20.218318] isapnp: Scanning for PnP cards...
[ 20.289713] Switched to high resolution mode on CPU 1
[ 20.293640] Switched to high resolution mode on CPU 0
[ 20.570958] isapnp: No Plug & Play device found
[ 20.584268] Real Time Clock Driver v1.12ac
[ 20.584330] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.585125] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.585161] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 20.585216] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.587303] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.587306] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.602419] mice: PS/2 mouse device common for all mice
[ 20.602475] EISA: Probing bus 0 at eisa.0
[ 20.602495] EISA: Detected 0 cards.
[ 20.602497] cpuidle: using governor ladder
[ 20.602498] cpuidle: using governor menu
[ 20.602539] TCP cubic registered
[ 20.602544] NET: Registered protocol family 1
[ 20.602559] Using IPI No-Shortcut mode
[ 20.602624] Magic number: 8:437:304
[ 20.602648] hash matches device tty33
[ 20.602748] Freeing unused kernel memory: 364k freed
[ 20.619162] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 21.722176] fuse init (API version 7.9)
[ 21.727695] ACPI: SSDT 7FEE7F80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
[ 21.727872] ACPI: SSDT 7FEE8440, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
[ 21.727965] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.727971] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.728531] ACPI Error (dswstate-0226): No result objects! State=df846e00 [20070126]
[ 21.728534] ACPI Exception (dsutils-0642): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070126]
[ 21.728536] ACPI Exception (dsutils-0735): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20070126]
[ 21.728539] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node f7c380c0), AE_AML_NO_RETURN_VALUE
[ 21.870294] usbcore: registered new interface driver usbfs
[ 21.870306] usbcore: registered new interface driver hub
[ 21.875227] usbcore: registered new device driver usb
[ 21.879922] USB Universal Host Controller Interface driver v3.0
[ 21.879954] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.879960] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 21.879963] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.880095] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 21.880116] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 21.880189] usb usb1: configuration #1 chosen from 1 choice
[ 21.880202] hub 1-0:1.0: USB hub found
[ 21.880205] hub 1-0:1.0: 2 ports detected
[ 21.938927] SCSI subsystem initialized
[ 21.961007] libata version 3.00 loaded.
[ 21.980232] FDC 0 is a post-1991 82077
[ 21.980629] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 21.980636] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 21.980638] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 21.980651] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 21.980671] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fe00
[ 21.980737] usb usb2: configuration #1 chosen from 1 choice
[ 21.980749] hub 2-0:1.0: USB hub found
[ 21.980752] hub 2-0:1.0: 2 ports detected
[ 22.084523] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 18
[ 22.084530] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 22.084532] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 22.084545] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 22.084565] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 22.084623] usb usb3: configuration #1 chosen from 1 choice
[ 22.084636] hub 3-0:1.0: USB hub found
[ 22.084638] hub 3-0:1.0: 2 ports detected
[ 22.188461] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 22.188468] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.188471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.188486] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 22.188508] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fc00
[ 22.188583] usb usb4: configuration #1 chosen from 1 choice
[ 22.188600] hub 4-0:1.0: USB hub found
[ 22.188603] hub 4-0:1.0: 2 ports detected
[ 22.292345] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 22.292350] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.292353] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.292367] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 22.292386] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fb00
[ 22.292460] usb usb5: configuration #1 chosen from 1 choice
[ 22.292476] hub 5-0:1.0: USB hub found
[ 22.292479] hub 5-0:1.0: 2 ports detected
[ 22.323321] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 22.396242] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 22.396247] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.396250] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.396265] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 22.396285] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fa00
[ 22.396361] usb usb6: configuration #1 chosen from 1 choice
[ 22.396377] hub 6-0:1.0: USB hub found
[ 22.396380] hub 6-0:1.0: 2 ports detected
[ 22.495243] usb 2-1: configuration #1 chosen from 1 choice
[ 22.500484] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 22.500496] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 22.500639] eth0: RTL8169sc/8110sc at 0xf881c000, 00:50:8d:9f:41:dd, XID 18000000 IRQ 21
[ 22.501345] ahci 0000:00:1f.2: version 3.0
[ 22.501358] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 22.734835] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 22.904853] usb 2-2: configuration #1 chosen from 1 choice
[ 23.034576] usbcore: registered new interface driver hiddev
[ 23.051822] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2
[ 23.062548] input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2
[ 23.062557] usbcore: registered new interface driver usbhid
[ 23.062559] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 23.503085] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 23.503088] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
[ 23.503091] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.503293] scsi0 : ahci
[ 23.503380] scsi1 : ahci
[ 23.503447] scsi2 : ahci
[ 23.503513] scsi3 : ahci
[ 23.503579] scsi4 : ahci
[ 23.503646] scsi5 : ahci
[ 23.503702] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 222
[ 23.503704] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 222
[ 23.503706] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 222
[ 23.503708] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 222
[ 23.503710] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 222
[ 23.503711] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 222
[ 23.977593] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.134274] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100, ATAPI AN
[ 24.291139] ata1.00: configured for UDMA/100
[ 24.764837] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 24.781429] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
[ 24.781431] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 24.783361] ata2.00: configured for UDMA/133
[ 25.096487] ata3: SATA link down (SStatus 0 SControl 300)
[ 25.404178] ata4: SATA link down (SStatus 0 SControl 300)
[ 25.715865] ata5: SATA link down (SStatus 0 SControl 300)
[ 26.027535] ata6: SATA link down (SStatus 0 SControl 300)
[ 26.028157] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5
[ 26.028255] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 26.028508] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 26.028516] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 26.028518] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 26.028534] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 26.032433] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 26.032437] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfdfff000
[ 26.039568] sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 26.039575] sd 1:0:0:0: [sda] Write Protect is off
[ 26.039577] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.039586] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.039613] sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 26.039619] sd 1:0:0:0: [sda] Write Protect is off
[ 26.039620] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.039629] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.039631] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 26.044844] Uniform CD-ROM driver Revision: 3.20
[ 26.044874] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 26.047532] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.047608] usb usb7: configuration #1 chosen from 1 choice
[ 26.047626] hub 7-0:1.0: USB hub found
[ 26.047630] hub 7-0:1.0: 6 ports detected
[ 26.076519] usb 2-1: USB disconnect, address 2
[ 26.109670] sda1 sda2 sda3 sda4
[ 26.126491] sd 1:0:0:0: [sda] Attached SCSI disk
[ 26.128937] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 26.128947] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 26.147452] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 26.147459] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 26.147461] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 26.147477] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 26.151376] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 26.151380] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffe000
[ 26.163416] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.163491] usb usb8: configuration #1 chosen from 1 choice
[ 26.163510] hub 8-0:1.0: USB hub found
[ 26.163515] hub 8-0:1.0: 6 ports detected
[ 26.204394] usb 2-2: USB disconnect, address 3
[ 26.267398] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 26.267404] PCI: Setting latency timer of device 0000:02:02.0 to 64
[ 26.317045] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 26.325315] Attempting manual resume
[ 26.325317] swsusp: Resume From Partition 8:3
[ 26.325318] PM: Checking swsusp image.
[ 26.325441] PM: Resume from disk failed.
[ 26.352617] kjournald starting. Commit interval 5 seconds
[ 26.352623] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.014563] usb 2-1: new full speed USB device using uhci_hcd and address 4
[ 27.186672] usb 2-1: configuration #1 chosen from 1 choice
[ 27.427148] usb 2-2: new low speed USB device using uhci_hcd and address 5
[ 27.590088] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d000099d2d7]
[ 27.601252] usb 2-2: configuration #1 chosen from 1 choice
[ 27.622319] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input3
[ 27.642956] input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2
[ 32.016870] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.041069] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.369175] Linux agpgart interface v0.102
[ 32.447794] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.494520] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.511158] input: Power Button (FF) as /devices/virtual/input/input4
[ 32.536998] ACPI: Power Button (FF) [PWRF]
[ 32.537039] input: Power Button (CM) as /devices/virtual/input/input5
[ 32.568960] ACPI: Power Button (CM) [PWRB]
[ 32.682259] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
[ 32.682268] usbcore: registered new interface driver usblp
[ 32.880812] iTCO_vendor_support: vendor-support=0
[ 32.917703] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 32.917746] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[ 32.917771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.076666] nvidia: module license 'NVIDIA' taints kernel.
[ 33.327138] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.327144] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 33.327199] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.23 Thu Oct 4 10:16:34 PDT 2007
[ 33.337712] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 33.390488] usbcore: registered new interface driver lmpcm_usb
[ 33.390490] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 33.488958] logips2pp: Detected unknown logitech mouse model 127
[ 33.511118] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 33.511134] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 33.954379] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input7
[ 34.787101] lp: driver loaded but no devices found
[ 34.832503] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k
[ 110.410947] EXT3 FS on sda2, internal journal
[ 708.232734] kjournald starting. Commit interval 5 seconds
[ 708.232974] EXT3 FS on sda4, internal journal
[ 708.232977] EXT3-fs: mounted filesystem with ordered data mode.
[ 709.674190] No dock devices found.
[ 709.680029] ACPI: \_SB_.PCI0.PEX4.JMB0.IDE0.PRI0: found ejectable bay
[ 709.680033] ACPI: \_SB_.PCI0.PEX4.JMB0.IDE0.PRI0: Adding notify handler
[ 709.680054] ACPI: Bay [\_SB_.PCI0.PEX4.JMB0.IDE0.PRI0] Added
[ 709.754874] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 711.347124] ppdev: user-space parallel port driver
[ 711.579028] r8169: eth1: link up
[ 713.670548] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 713.670550] vboxdrv: Successfully done.
[ 713.670573] vboxdrv: Successfully loaded version 1.5.4 (interface 0x00050002).
[ 713.764662] powertweakd[5422]: segfault at 0000000d eip b7d6714b esp bfe764cc error 4
[ 714.373696] Bluetooth: Core ver 2.11
[ 714.373736] NET: Registered protocol family 31
[ 714.373737] Bluetooth: HCI device and connection manager initialized
[ 714.373740] Bluetooth: HCI socket layer initialized
[ 714.423150] Bluetooth: L2CAP ver 2.9
[ 714.423153] Bluetooth: L2CAP socket layer initialized
[ 714.457863] Bluetooth: RFCOMM socket layer initialized
[ 714.457870] Bluetooth: RFCOMM TTY layer initialized
[ 714.457872] Bluetooth: RFCOMM ver 1.8
[ 718.655179] NET: Registered protocol family 17
[ 721.940897] NET: Registered protocol family 10
[ 721.941101] lo: Disabled Privacy Extensions
[ 732.836597] eth1: no IPv6 routers present
[29684.961752] usb 7-6: new high speed USB device using ehci_hcd and address 7
[29685.261345] usb 7-6: new high speed USB device using ehci_hcd and address 8
[29686.312396] usb 7-6: new high speed USB device using ehci_hcd and address 13
[29686.799906] usb 7-6: new high speed USB device using ehci_hcd and address 15
[29687.667052] usb 7-6: new high speed USB device using ehci_hcd and address 19
[29688.716985] usb 7-6: new high speed USB device using ehci_hcd and address 24
[29689.204527] usb 7-6: new high speed USB device using ehci_hcd and address 26
[29690.444251] usb 7-6: new high speed USB device using ehci_hcd and address 32
[29691.682014] usb 7-6: new high speed USB device using ehci_hcd and address 38
[29692.169521] usb 7-6: new high speed USB device using ehci_hcd and address 40
[29692.658033] usb 7-6: new high speed USB device using ehci_hcd and address 42
[29692.957734] usb 7-6: new high speed USB device using ehci_hcd and address 43
[29693.444243] usb 7-6: new high speed USB device using ehci_hcd and address 45
[29693.932754] usb 7-6: new high speed USB device using ehci_hcd and address 47
[29695.358337] usb 7-6: new high speed USB device using ehci_hcd and address 54
[29696.414266] usb 7-6: new high speed USB device using ehci_hcd and address 59
[29697.089586] usb 7-6: new high speed USB device using ehci_hcd and address 62
[29697.952723] usb 7-6: new high speed USB device using ehci_hcd and address 66
[29698.252421] usb 7-6: new high speed USB device using ehci_hcd and address 67
[29698.555120] usb 7-6: new high speed USB device using ehci_hcd and address 68
[29700.733935] usb 7-6: new high speed USB device using ehci_hcd and address 79
[29701.220444] usb 7-6: new high speed USB device using ehci_hcd and address 81
[29702.831568] usb 7-6: new high speed USB device using ehci_hcd and address 89
[29704.257399] usb 7-6: new high speed USB device using ehci_hcd and address 96
[29704.744911] usb 7-6: new high speed USB device using ehci_hcd and address 98
[29705.232420] usb 7-6: new high speed USB device using ehci_hcd and address 100
[29706.663876] usb 7-6: new high speed USB device using ehci_hcd and address 107
[29707.338310] usb 7-6: new high speed USB device using ehci_hcd and address 110
[29708.955061] usb 7-6: new high speed USB device using ehci_hcd and address 118
[29709.263247] usb 7-6: new high speed USB device using ehci_hcd and address 119
[29710.124517] usb 7-6: new high speed USB device using ehci_hcd and address 123
[29711.741896] usb 7-6: new high speed USB device using ehci_hcd and address 5
[29712.606029] usb 7-6: new high speed USB device using ehci_hcd and address 9
[29713.468211] usb 7-6: new high speed USB device using ehci_hcd and address 13
[29714.894733] usb 7-6: new high speed USB device using ehci_hcd and address 20
[29715.195437] usb 7-6: new high speed USB device using ehci_hcd and address 21
[29715.869755] usb 7-6: new high speed USB device using ehci_hcd and address 24
[29716.357363] usb 7-6: new high speed USB device using ehci_hcd and address 26
[29717.976650] usb 7-6: new high speed USB device using ehci_hcd and address 34
[29718.275342] usb 7-6: new high speed USB device using ehci_hcd and address 35
[29718.763852] usb 7-6: new high speed USB device using ehci_hcd and address 37
[29719.253235] usb 7-6: new high speed USB device using ehci_hcd and address 39
[29720.864745] usb 7-6: new high speed USB device using ehci_hcd and address 47
[29721.734353] usb 7-6: new high speed USB device using ehci_hcd and address 51
[29722.031576] usb 7-6: new high speed USB device using ehci_hcd and address 52
[29723.270334] usb 7-6: new high speed USB device using ehci_hcd and address 58
[29723.757845] usb 7-6: new high speed USB device using ehci_hcd and address 60
[29724.433166] usb 7-6: new high speed USB device using ehci_hcd and address 63
[29725.484139] usb 7-6: new high speed USB device using ehci_hcd and address 68
[29725.784812] usb 7-6: new high speed USB device using ehci_hcd and address 69
[29726.083512] usb 7-6: new high speed USB device using ehci_hcd and address 70
[29727.138459] usb 7-6: new high speed USB device using ehci_hcd and address 75
[29727.454136] usb 7-6: new high speed USB device using ehci_hcd and address 76
[29728.129464] usb 7-6: new high speed USB device using ehci_hcd and address 79
[29728.800786] usb 7-6: new high speed USB device using ehci_hcd and address 82
[29729.101487] usb 7-6: new high speed USB device using ehci_hcd and address 83
[29729.404184] usb 7-6: new high speed USB device using ehci_hcd and address 84
[29729.892693] usb 7-6: new high speed USB device using ehci_hcd and address 86
[29730.572013] usb 7-6: new high speed USB device using ehci_hcd and address 89
[29731.246339] usb 7-6: new high speed USB device using ehci_hcd and address 92
[29732.298277] usb 7-6: new high speed USB device using ehci_hcd and address 97
[29732.597079] usb 7-6: new high speed USB device using ehci_hcd and address 98
[29732.897680] usb 7-6: new high speed USB device using ehci_hcd and address 99
[29733.197880] usb 7-6: new high speed USB device using ehci_hcd and address 100
[29733.703876] usb 7-6: new high speed USB device using ehci_hcd and address 102
[29734.584510] usb 7-6: new high speed USB device using ehci_hcd and address 106
[29736.213357] usb 7-6: new high speed USB device using ehci_hcd and address 114
[29736.700898] usb 7-6: new high speed USB device using ehci_hcd and address 116
[29737.004721] usb 7-6: new high speed USB device using ehci_hcd and address 117
[29737.312276] usb 7-6: new high speed USB device using ehci_hcd and address 118
[29737.988641] usb 7-6: new high speed USB device using ehci_hcd and address 121
[29739.043516] usb 7-6: new high speed USB device using ehci_hcd and address 126
[29739.531026] usb 7-6: new high speed USB device using ehci_hcd and address 2
[29739.830734] usb 7-6: new high speed USB device using ehci_hcd and address 3
[29740.317240] usb 7-6: new high speed USB device using ehci_hcd and address 5
[29740.993732] usb 7-6: new high speed USB device using ehci_hcd and address 8
[29742.606942] usb 7-6: new high speed USB device using ehci_hcd and address 16
[29743.095453] usb 7-6: new high speed USB device using ehci_hcd and address 18
[29743.394372] usb 7-6: new high speed USB device using ehci_hcd and address 19
[29743.698845] usb 7-6: new high speed USB device using ehci_hcd and address 20
[29744.186356] usb 7-6: new high speed USB device using ehci_hcd and address 22
[29744.485059] usb 7-6: new high speed USB device using ehci_hcd and address 23
[29744.972569] usb 7-6: new high speed USB device using ehci_hcd and address 25
[29745.648891] usb 7-6: new high speed USB device using ehci_hcd and address 28
[29746.698837] usb 7-6: new high speed USB device using ehci_hcd and address 33
[29746.998538] usb 7-6: new high speed USB device using ehci_hcd and address 34
[29747.487047] usb 7-6: new high speed USB device using ehci_hcd and address 36
[29749.097441] usb 7-6: new high speed USB device using ehci_hcd and address 44
[29750.155373] usb 7-6: new high speed USB device using ehci_hcd and address 49
[29753.109414] usb 7-6: new high speed USB device using ehci_hcd and address 64
[29754.351165] usb 7-6: new high speed USB device using ehci_hcd and address 70
[29754.651863] usb 7-6: new high speed USB device using ehci_hcd and address 71
[29833.228066] usb 7-6: new high speed USB device using ehci_hcd and address 72
[29833.715577] usb 7-6: new high speed USB device using ehci_hcd and address 74
[29834.015280] usb 7-6: new high speed USB device using ehci_hcd and address 75
[29834.314976] usb 7-6: new high speed USB device using ehci_hcd and address 76
[29834.990865] usb 7-6: new high speed USB device using ehci_hcd and address 79
[29835.481806] usb 7-6: new high speed USB device using ehci_hcd and address 81
[29836.537748] usb 7-6: new high speed USB device using ehci_hcd and address 86
[29836.841448] usb 7-6: new high speed USB device using ehci_hcd and address 87
[29837.519763] usb 7-6: new high speed USB device using ehci_hcd and address 90
[29838.196083] usb 7-6: new high speed USB device using ehci_hcd and address 93
fjf is offline   Reply With Quote
Old 01-16-2008, 02:38 AM   #6
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
Maybe the last lines refer to it, because I have no other usb drives connected. I can connect my external usb harddrive or any usb flashdrive (I've tried a few). What modules can I load to try and how?.

Thanks.

Last edited by fjf; 01-16-2008 at 03:45 AM.
fjf is offline   Reply With Quote
Old 01-16-2008, 02:38 AM   #7
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
......

Last edited by fjf; 01-16-2008 at 03:34 AM. Reason: sorry, double post
fjf is offline   Reply With Quote
Old 01-16-2008, 09:35 AM   #8
Pickle
Enthusiast
Pickle began at the beginning.
 
Posts: 26
Karma: 10
Join Date: Dec 2006
Location: Boston, MA
Device: Cybook Gen3
There's definitely something being found. Do you have an SD card in the Cybook? I think some people have had problems with that. When I get home tonight I'll plug my cybook in and see what pops up in Dmesg and if it looks weird/different.
Have you tried a different USB port? It looks like you're going through a hub, can you try plugging it into one of the ports that's actually on the computer?
Sorry I can't be more helpful right now. It turns out I pretend to know a lot more about Linux than I really do. :-/
Pickle is offline   Reply With Quote
Old 01-16-2008, 10:37 AM   #9
tompe
Grand Sorcerer
tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.
 
Posts: 7,053
Karma: 3993884
Join Date: Oct 2007
Location: Link÷png, Sweden
Device: Nexus 7, Nexus 5, iPad 2, Kindle PW
What you should see in the dmesg output is something like:

Code:
usb 5-7: new high speed USB device using ehci_hcd and address 7
usb 5-7: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access     Bookeen  Cybook Gen3  -SD 1.00 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:1: Direct-Access     Bookeen  Cybook Gen3  -FD 1.00 PQ: 0 ANSI: 0 CCS
SCSI device sda: 3970048 512-byte hdwr sectors (2033 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 3970048 512-byte hdwr sectors (2033 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
 sda: sda1
sd 4:0:0:0: Attached scsi removable disk sda
sd 4:0:0:0: Attached scsi removable disk sda
sd 4:0:0:0: Attached scsi generic sg1 type 0
SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:1: Attached scsi removable disk sdb
sd 4:0:0:1: Attached scsi generic sg2 type 0
So something is wrong. You are probably missing a module or maybe it is that you connect through a hub.

Do lsmod to check which modules you have loaded. I think it depend on the kernel version which ones you need. For older kernels I think scsi_mod is needed but for never kernels you use usb_storage instead.
tompe is offline   Reply With Quote
Old 01-16-2008, 10:41 AM   #10
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
Definitely, the dmesg changes after plugging the cybook is:

[ 156.414141] usb 7-6: new high speed USB device using ehci_hcd and address 5
[ 156.713842] usb 7-6: new high speed USB device using ehci_hcd and address 6
[ 157.389166] usb 7-6: new high speed USB device using ehci_hcd and address 9
[ 158.063492] usb 7-6: new high speed USB device using ehci_hcd and address 12
[ 158.922672] usb 7-6: new high speed USB device using ehci_hcd and address 16
[ 159.222334] usb 7-6: new high speed USB device using ehci_hcd and address 17
[ 159.709845] usb 7-6: new high speed USB device using ehci_hcd and address 19
[ 160.197357] usb 7-6: new high speed USB device using ehci_hcd and address 21
[ 160.497059] usb 7-6: new high speed USB device using ehci_hcd and address 22
[ 160.985569] usb 7-6: new high speed USB device using ehci_hcd and address 24
[ 161.284272] usb 7-6: new high speed USB device using ehci_hcd and address 25

I am not using a hub, and the problem persists after using any usb connection in my computer.

lsmod output:

Module Size Used by
ipv6 267780 12
xt_limit 3584 8
xt_tcpudp 4096 20
ipt_LOG 7296 8
ipt_MASQUERADE 4608 0
ipt_TOS 3200 0
ipt_REJECT 5632 1
nf_conntrack_irc 7576 0
nf_conntrack_ftp 10144 0
xt_state 3328 6
af_packet 23812 2
binfmt_misc 12808 1
rfcomm 41744 2
l2cap 25728 11 rfcomm
bluetooth 60132 4 rfcomm,l2cap
vboxdrv 60592 0
ppdev 10372 0
acpi_cpufreq 10796 0
cpufreq_userspace 5284 0
cpufreq_ondemand 9740 2
cpufreq_powersave 2688 0
cpufreq_conservative 8712 0
cpufreq_stats 7104 0
freq_table 5536 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
video 19728 0
output 4736 1 video
bay 6912 0
dock 11280 1 bay
container 5632 0
sbs 14984 0
sbshc 7680 1 sbs
ac 6916 0
battery 14084 0
power_supply 9988 3 sbs,ac,battery
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
snd_hda_intel 295328 1
snd_pcm_oss 42624 0
snd_mixer_oss 17536 1 snd_pcm_oss
snd_pcm 80644 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 33280 0
snd_seq_midi 9472 0
snd_rawmidi 25600 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
lmpcm_usb 7168 0
snd_seq 53104 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 24324 2 snd_pcm,snd_seq
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
serio_raw 7940 0
iTCO_wdt 13092 0
usblp 15872 0
evdev 13056 3
psmouse 40208 0
pcspkr 4224 0
iTCO_vendor_support 4868 1 iTCO_wdt
snd 55172 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
nvidia 6223184 34
soundcore 8800 1 snd
snd_page_alloc 11272 2 snd_hda_intel,snd_pcm
i2c_core 24832 1 nvidia
shpchp 34452 0
pci_hotplug 30880 1 shpchp
intel_agp 25364 0
agpgart 34760 2 nvidia,intel_agp
button 9232 0
iptable_nat 8324 0
nf_nat 20396 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 18824 8 iptable_nat
nf_conntrack 66496 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,x t_state,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_mangle 3712 0
iptable_filter 3840 1
ip_tables 14820 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 16132 9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS, ipt_REJECT,xt_state,iptable_nat,ip_tables
ext3 136840 2
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
sd_mod 30592 5
cdrom 37408 1 sr_mod
usbhid 31744 0
hid 38528 1 usbhid
r8169 32772 0
ahci 28292 4
ohci1394 33584 0
ieee1394 93752 2 sbp2,ohci1394
libata 156400 1 ahci
scsi_mod 151308 5 sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 37004 0
uhci_hcd 27024 0
usbcore 145644 6 lmpcm_usb,usblp,usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 2 acpi_cpufreq,thermal
fan 5380 0
fuse 50580 3

If I use my flash usb drive, it mounts fine and dmesg says:

[ 544.957645] usb 7-6: configuration #1 chosen from 1 choice
[ 545.036153] usbcore: registered new interface driver libusual
[ 545.041264] Initializing USB Mass Storage driver...
[ 545.041314] scsi6 : SCSI emulation for USB Mass Storage devices
[ 545.041358] usbcore: registered new interface driver usb-storage
[ 545.041361] USB Mass Storage support registered.
[ 545.041424] usb-storage: device found at 123
[ 545.041426] usb-storage: waiting for device to settle before scanning
[ 550.031746] usb-storage: device scan complete
[ 550.032252] scsi 6:0:0:0: Direct-Access Generic USB Flash Drive 1.00 PQ: 0 ANSI: 2
[ 550.036980] sd 6:0:0:0: [sdb] 16384001 512-byte hardware sectors (8389 MB)
[ 550.037479] sd 6:0:0:0: [sdb] Write Protect is off
[ 550.037482] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 550.037484] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 550.039603] sd 6:0:0:0: [sdb] 16384001 512-byte hardware sectors (8389 MB)
[ 550.040100] sd 6:0:0:0: [sdb] Write Protect is off
[ 550.040103] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 550.040105] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 550.040107] sdb: unknown partition table
[ 550.046512] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 550.046544] sd 6:0:0:0: Attached scsi generic sg2 type 0

A sudo modprobe scsi_mod or usb_storage has no effect.

Last edited by fjf; 01-16-2008 at 10:55 AM.
fjf is offline   Reply With Quote
Old 01-16-2008, 11:12 AM   #11
tompe
Grand Sorcerer
tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.tompe ought to be getting tired of karma fortunes by now.
 
Posts: 7,053
Karma: 3993884
Join Date: Oct 2007
Location: Link÷png, Sweden
Device: Nexus 7, Nexus 5, iPad 2, Kindle PW
Did the Gen3 work after you had tested the flash usb drive since usb_core seemed to be loaded then. What kernel version are you running?

If it hadn't worked in Windows I would have suggested to check the cable and that it was properly connected. Maybe you should test with the Live CD referred to above.
tompe is offline   Reply With Quote
Old 01-16-2008, 11:19 AM   #12
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
Using 2.6.24-2-generic (but the problem is the same with 2.6.22). I tested it after or with the flash drive with no luck. I tried booting with the ubuntu 7.10 live cd with no luck.
fjf is offline   Reply With Quote
Old 01-18-2008, 07:03 AM   #13
JohnnyD
Connoisseur
JohnnyD doesn't litterJohnnyD doesn't litterJohnnyD doesn't litter
 
Posts: 94
Karma: 221
Join Date: Oct 2006
Location: Drenthe, The Netherlands
Device: Cybook Gen3 (cracked screen)/Bebook/Nokia E60/Nokia 5800
Are there any other usb devices connected to your PC? If you have, you could try the following:

PC:
1. disconnect all usb devices
2. power off PC
3. boot PC

Cybook:
4. remove SD card from Cybook
5. reboot Cybook
6. connect Cybook to PC, without any other usb devices attached

The reason for this approach is, that there are some linux drivers for usb devices which are a bit clumsy (even on my favourite Gentoo system)
JohnnyD is offline   Reply With Quote
Old 01-18-2008, 12:35 PM   #14
fjf
Member
fjf began at the beginning.
 
Posts: 21
Karma: 14
Join Date: Jan 2008
Device: cybook gen3
Thanks for your answer. I just tried it and didnt work
fjf is offline   Reply With Quote
Old 01-18-2008, 02:14 PM   #15
delphidb96
Wizard
delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.delphidb96 ought to be getting tired of karma fortunes by now.
 
Posts: 3,000
Karma: 300001
Join Date: Jan 2007
Location: Citrus Heights, California
Device: TWO Kindle 2s, one each Bookeen Cybook Gen3, Sony PRS-500, Axim X51V
Quote:
Originally Posted by fjf View Post
Thanks for your answer. I just tried it and didnt work
We had a similar situation posted here earlier. If I remember correctly, the Cybook *was* connected directly to the PC, but *NOT* to the right USB port. Yes, under WinXP that's not a problem, but under Linux, *some* USB ports are better - more recognizeable - than others. For example, there are two direct-to-the-motherboard ports on my HP Pavilion - on the front of the machine - which can recognize the Cybook, even under Linux. And two of the rear USB ports will, but the other two and the USB port built into the internal 9-card media reader *won't recognize it at all and even WinXP won't recognize the Cybook if I plug the cable into the media card's USB port. So check this out.

Derek
delphidb96 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Look what I found Nate the great Lounge 16 06-14-2010 12:07 AM
Found you! joycedb Introduce Yourself 16 05-21-2010 12:44 PM
Just found this one pathfinderca Alternative Devices 4 08-11-2009 01:44 AM
Something I found lilpretender Calibre 0 08-10-2009 11:21 PM
Found a source for Cybook Gen3/Netronix EB-100 batteries! delphidb96 Bookeen 0 06-08-2008 03:02 PM


All times are GMT -4. The time now is 10:13 PM.


MobileRead.com is a privately owned, operated and funded community.