K3 Grep Gripes on FAT Fail. Busted or what?

[twobob]

um. now I'm no expert but grep should not just hang...

[root@kindle bin]# strace grep -l "/usr/bin/perl"

Spoiler:

execve("/bin/grep", ["grep", "-l", "/usr/bin/perl"], [/* 33 vars */]) = 0
brk(0)                                  = 0x7e000
uname({sys="Linux", node="kindle", ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001b000
open("/mnt/us/usr/lib/libz.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\354\27\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=143358, ...}) = 0
mmap2(NULL, 162384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40025000
mprotect(0x40045000, 28672, PROT_NONE)  = 0
mmap2(0x4004c000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1f) = 0x4004c000
close(3)                                = 0
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/v6l/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/v6l/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/v6l/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/v6l/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/v6l/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/v6l/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/v6l/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/v6l", 0xbed45f50)  = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls", 0xbed45f50)      = -1 ENOENT (No such file or directory)
open("/usr/lib/v6l/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/v6l/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/v6l/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/v6l/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/v6l/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/v6l/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/v6l/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/v6l", 0xbed45f50)      = -1 ENOENT (No such file or directory)
open("/usr/lib/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/usr/lib/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/half", 0xbed45f50)     = -1 ENOENT (No such file or directory)
open("/usr/lib/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=7168, ...}) = 0
open("/lib/tls/v6l/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/v6l/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/tls/v6l/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/v6l/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/tls/v6l/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/v6l/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/tls/v6l/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/v6l", 0xbed45f50)      = -1 ENOENT (No such file or directory)
open("/lib/tls/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/tls/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/tls/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/half", 0xbed45f50)     = -1 ENOENT (No such file or directory)
open("/lib/tls/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls", 0xbed45f50)          = -1 ENOENT (No such file or directory)
open("/lib/v6l/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/v6l/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/v6l/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/v6l/fast-mult", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/v6l/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/v6l/half", 0xbed45f50)     = -1 ENOENT (No such file or directory)
open("/lib/v6l/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/v6l", 0xbed45f50)          = -1 ENOENT (No such file or directory)
open("/lib/fast-mult/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/fast-mult/half", 0xbed45f50) = -1 ENOENT (No such file or directory)
open("/lib/fast-mult/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/fast-mult", 0xbed45f50)    = -1 ENOENT (No such file or directory)
open("/lib/half/libcrypt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/half", 0xbed45f50)         = -1 ENOENT (No such file or directory)
open("/lib/libcrypt.so.1", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\20\7\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=26525, ...}) = 0
mmap2(NULL, 213304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4004d000
mprotect(0x40052000, 28672, PROT_NONE)  = 0
mmap2(0x40059000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4) = 0x40059000
mmap2(0x4005b000, 155960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4005b000
close(3)                                = 0
open("/usr/lib/libm.so.6", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/lib/libm.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0`2\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=496558, ...}) = 0
mmap2(NULL, 475320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40082000
mprotect(0x400ee000, 28672, PROT_NONE)  = 0
mmap2(0x400f5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6b) = 0x400f5000
close(3)                                = 0
open("/usr/lib/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/libgcc_s.so.1", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0L\"\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=42348, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001c000
mmap2(NULL, 72588, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x400f7000
mprotect(0x40101000, 28672, PROT_NONE)  = 0
mmap2(0x40108000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9) = 0x40108000
close(3)                                = 0
open("/usr/lib/libc.so.6", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/lib/libc.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\250J\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1348230, ...}) = 0
mmap2(NULL, 1135004, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40109000
mprotect(0x40212000, 28672, PROT_NONE)  = 0
mmap2(0x40219000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x108) = 0x40219000
mmap2(0x4021c000, 8604, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4021c000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000
set_tls(0x4001ced0, 0x4001ced0, 0x40024058, 0x4001d5a8, 0x40) = 0
mprotect(0x40219000, 8192, PROT_READ)   = 0
mprotect(0x400f5000, 4096, PROT_READ)   = 0
mprotect(0x40059000, 4096, PROT_READ)   = 0
getuid32()                              = 0
brk(0)                                  = 0x7e000
brk(0x9f000)                            = 0x9f000
fstat64(0, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001e000
read(0,

and then it hangs. forever...

htop has it at 0 cpu... 0.2 mem so it doesn't bomb. just hangs ???

anyone ACTUALLY used the kindles grep - or am I making a new one - that works? Thanks

[qlob]

I have not used it, but I will go try it.
EDIT: It works for me, but I only tried it on a small file.

[twobob]

hmm...

find . -type f | xargs grep -l "/usr/bin/perl"

does stuff... er... confuzzled now.

Am I just being stupid?

ah well. I'll use that. thanks anyway

(xargs! - *shudder*)

[twobob]

[root@kindle bin]# find . -type f | xargs grep -l "/usr/bin/perl"
./intltool-extract
./intltool-merge
./intltool-update
./intltool-prepare
[root@kindle bin]#

Happy days.

[knc1]

Try:
strace -fF ....
Post the result.

The above just looks like it did not trace into the segfault message.

You will also notice that whatever is being traced, is built with multi-arch/multi-lib support (we don't really need that, there is only one K3 arch).

[NiLuJe]

@twobob: Perfectly normal. You need to ask grep to find something *somewhere*. Right now it's defaulting to reading stdin. Since there's nothing to match there, it hangs until something interesting happens in stdin .

EDIT: Hence why it works when you pipe something to it .

[twobob]

grep -l "/usr/bin/perl" *

DAAAAAAIIIIIEEEEE!!!!!!!! @__________@ DOH!

More tea!!!!

Thanks all. what a wally.

[knc1]

* * * * * *
Just practicing. Now if I could learn to read ...

[geekmaster]

Sadly, it takes me awhile to figure out why it is taking so long when I do that (but usually no more that 15 seconds or so).

[twobob]

I know, what a doof.

it was the first time I had run it on the device after installing 1.3 Gb of various software

I was a bit concerned I had blown it's mind. As it turns out it was my mind that needed looking at.

I can see the headlines now: "Human in brain fail shocker!"


BUSTED OR WHAT!!!

[geekmaster]

Originally Posted by twobob

...
BUSTED OR WHAT!!!

At least the replies you got were more helpful that a simple RTFM, or "grep --help". Can you imagine what would happen if a noob had that problem here?

[twobob]

It's true, note to self - do not poke noobs, poke, ouch! note to self - do not poke noobs, poke, ouch! note to self - do not poke noobs, poke, ouch! note to self - do not poke noobs, poke, ouch! note to self - do not poke noobs, poke, ouch!



EDIT: For some reason this remind me of an old Vic20 Program...

Poke 36529,blah. The color register if my befeebled mind still serves, Zomg, someone tell me why I can remember the poke registers for a 20 year old machine and can't remember how to use Grep.

Ah well. Back to finding errors in Perl. One file at a time. it's only been 6 hours no doubt my homebrew perl will soon be powerful enough to build yum. Better be I'm getting bored

If I have to run make microperl-reconfigure one more time I may go insane.
on the bright side it takes 1 min as opposed to 90 mins. Thank you Buildroot!

[qlob]

Originally Posted by twobob

.......
Ah well. Back to finding errors in Perl. One file at a time. it's only been 6 hours no doubt my homebrew perl will soon be powerful enough to build yum. Better be I'm getting bored
.......

(Shameless "noob" (I still think I am one) plugging in here:

Isn't YUM written in python? Or am I just confused as to what microperl does?

EDIT: It's probably the latter as I just checked, and the wiki says it's written in Python.
http://en.wikipedia.org/wiki/Yellowd...ater,_Modified

[twobob]

yepo.

[root@kindle yum]# make
for d in rpmUtils yum yum-cron etc docs po; do make PYTHON=python -C $d; [ $? = 0 ] || exit 1 ; done
make[1]: Entering directory `/mnt/us/src/yum/rpmUtils'
echo "Nothing to do"
Nothing to do
make[1]: Leaving directory `/mnt/us/src/yum/rpmUtils'
make[1]: Entering directory `/mnt/us/src/yum/yum'
echo "Nothing to do"
Nothing to do
make[1]: Leaving directory `/mnt/us/src/yum/yum'
make[1]: Entering directory `/mnt/us/src/yum/yum-cron'
echo "Nothing to do"
Nothing to do
make[1]: Leaving directory `/mnt/us/src/yum/yum-cron'
make[1]: Entering directory `/mnt/us/src/yum/etc'
echo "Nothing to do"
Nothing to do
make[1]: Leaving directory `/mnt/us/src/yum/etc'
make[1]: Entering directory `/mnt/us/src/yum/docs'
echo "Nothing to do"
Nothing to do
make[1]: Leaving directory `/mnt/us/src/yum/docs'
make[1]: Entering directory `/mnt/us/src/yum/po'
intltool-update --gettext-package=yum --pot
Use of uninitialized value $DynaLoader::dlsrc in string eq at /mnt/us/usr/lib/perl5/5.12.4/DynaLoader.pm line 64.
Use of uninitialized value in split at /mnt/us/usr/lib/perl5/5.12.4/DynaLoader.pm line 68.
Use of uninitialized value $DynaLoader::dlsrc in string eq at /mnt/us/usr/lib/perl5/5.12.4/DynaLoader.pm line 64.
Use of uninitialized value in split at /mnt/us/usr/lib/perl5/5.12.4/DynaLoader.pm line 68.
Can't load module Encode, dynamic loading not available in this perl.
(You may need to build a new perl executable which either supports
dynamic loading or has the Encode module statically linked into it.)
at /mnt/us/bin/intltool-extract line 944
Compilation failed in require at /mnt/us/bin/intltool-extract line 944.
BEGIN failed--compilation aborted at /mnt/us/bin/intltool-extract line 944.

*** The intltool-extract script wasn't found!
*** Without it, intltool-update can not generate files.
msgfmt -o bn_IN.mo bn_IN.po -c
make[1]: msgfmt: Command not found
make[1]: *** [bn_IN.mo] Error 127
make[1]: Leaving directory `/mnt/us/src/yum/po'
make: *** [subdirs] Error 1

but it needs perl to make

right.... err why?

sad.

[twobob]

For the record I burned 6 ish hours getting to that point.

I'll look at the Perl Makefile tomorrow.
MUST DO SOMETHING MORE EXCITING FOR A WHILE, serious boredom overload.

Samba it is : )